Radiotherapy Immobilisation & Positioning in Bangladesh

Patient positioning and immobilisation systems from Meicen for radiotherapy departments, keeping treatment geometry reproducible fraction after fraction.

75 products from 1 manufacturer: Meicen.

Products

• S-type Thermoplastic Masks — Meicen: Supplied as S-shaped head masks and S-shaped head-neck-shoulder masks, fitting all standard S-type baseplates from Meicen and other manufacturers. Standard thicknesses are 2.4 mm and 3.0 mm, with 2.0 mm and 3.2 mm also available.
• U-type Thermoplastic Masks — Meicen: Made in slim frame and standard frame versions, including reinforced, openface and open eyes and mouth variants. Standard thicknesses are 2.4 mm and 3.0 mm, with 22 per cent and 38 per cent perforation options.
• L-type Thermoplastic Masks — Meicen: Covers L-type triangular head masks, head-neck-shoulder masks and chest-pelvic masks, fitting all standard O-type baseplates from Meicen and other manufacturers. Standard thicknesses are 2.4 mm and 3.0 mm, with 2.0 mm and 3.2 mm also available.
• P-type Thermoplastic Masks — Meicen: Available as triangular head, head-neck-shoulder and chest-pelvic masks, fitting P-type baseplates from Meicen and other manufacturers. All types are also made in the openface series, which Meicen states is intended to alleviate symptoms of claustrophobia during radiotherapy.
• X-Knife Violet Thermoplastic Masks — Meicen: Violet thermoplastic masks made for X-Knife type frames, using a material Meicen describes as offering rigidity with extremely low shrinkage. A non-stick coating is applied to the patient facing surfaces so the mask does not stick to the patient's hair or beard.
• Meicen A-Series AIO Baseplate MC-AF001 — Meicen: Carbon fibre all-in-one baseplate providing multiple treatment options for head, neck, shoulders, thorax, pelvic and full-body support. It is compatible with all L-type thermoplastic masks and works with the shoulder retraction system, leg positioner cushions and SRS cradle MC-CR002.
• Meicen A-Series Head & Shoulder Baseplate MC-AF004 — Meicen: Carbon fibre baseplate providing an immobilisation solution for the head, neck and shoulders, for reproducible and comfortable patient positioning. It is compatible with all U-frame masks and L-type masks, and measures 550 mm long by 550 mm wide.
• Meicen A-Series Pelvic Baseplate MC-AF003 — Meicen: Carbon fibre baseplate used in radiotherapy to immobilise the patient's pelvic and lower abdominal region during cancer treatment. It is compatible with the L-type pelvic mask and can be used with leg positioner cushions and other accessories.
• Meicen B-Series U-Frame Head Baseplate MC-BF003 — Meicen: Rigid carbon fibre platform used in radiotherapy, particularly for head and neck treatments. It is compatible with all U-frame masks and can be combined with leg positioner cushions and other accessories.
• C-Series Head-Shoulder Baseplate MC-CF005 — Meicen: Carbon fibre baseplate with a pin-lock design for head and shoulder positioning, configured for standard and narrow shoulder S-type masks. It measures 1000 mm long by 606 mm wide and is dual configured for adult and paediatric patients.
• Meicen Y-Series AIO Baseplate MC-YF001 — Meicen: Carbon fibre all-in-one baseplate with a pin-lock design, supporting head, head-shoulders, thorax, pelvic and full-body positioning. It is dual configured for adult and paediatric treatments, takes all S-type masks and Meicen pin-lock type masks, and can be combined with the Meicen belly and knee bridge for SBRT.
• Meicen S-Series SBRT Solution MC-STF001 — Meicen: Carbon fibre SBRT immobilisation set comprising a baseplate with adjustable breathing bridges, belly and knee bridge paddles, wing board, respiratory belt, knee elevation cushion, feet cushion, headrest, indexing bar and shoulder retractor. The paddles adjust left and right and up and down to control the breathing range, and Meicen states the system is compatible with the couchtops of all brands.
• Meicen Vacuum Cushions — Meicen: Vacuum cushions with a coated nylon shell that protects against tear and stain, completely air-tight, water-proof, easy to clean and filled with specialised particles for rigid support around the patient. A built-in indexing batten, different sizes and shapes, and MR safe versions are available, with adapters for any manufacturer's pump.
• Meicen Prone Breast Board MC-RBF001 — Meicen: Carbon fibre board used in radiation therapy for breast cancer patients, allowing treatment while lying face down. It has variable aperture openings to accommodate different breast sizes and a reversible breast section so either breast can be treated.
• V-Type Violet Thermoplastic Masks — Meicen: Meicen supplies the V-Type violet thermoplastic mask family so that its sheets can be fitted to baseplates made by other manufacturers. Two anatomies are published, a V-shaped head mask and a V-shaped head-neck-shoulder mask, each offered as standard, reinforced, reinforced with open eyes and mouth, and reinforced openface, with the head mask additionally available extended by 5cm or 9cm. Sheet options run at 22% perforation in 2.4mm and 38% perforation in 3.0mm, and Meicen notes that 2.0mm and 3.2mm thicknesses are available if the thickness is specified at the point of enquiry. Its Openface series is intended to ease symptoms of claustrophobia during radiotherapy, with adjustable pulling of the open section giving both comfort and a reinforced effect.
• E-Type Violet Thermoplastic Masks — Meicen: The E-Type violet thermoplastic range covers four published anatomies: head mask, head-neck-shoulder mask, chest-pelvic mask and triangular head mask. Standard sheets are published at 22% perforation in 2.4mm, 38% perforation in 3.0mm and 15% perforation in 2.4mm, with reinforced sheets at 2.4mm and 3.0mm. Head masks are additionally listed extended by 5cm and by 21cm. Meicen states that 2.0mm and 3.2mm thicknesses can also be supplied where the thickness is specified with the enquiry.
• H-Type Violet Thermoplastic Masks — Meicen: H-Type violet thermoplastic masks are made by Meicen to fit its own B-Series baseplates. All eight published references are trunk masks covering the chest and pelvis, supplied as standard, standard with groin lock, reinforced and solid. Standard and groin lock sheets are published at 22% perforation in 2.4mm and 38% perforation in 3.0mm, while reinforced and solid sheets are listed at 2.4mm and 3.0mm. Thicknesses of 2.0mm and 3.2mm are also obtainable when specified at enquiry.
• Pin-lock Type Violet Thermoplastic Masks — Meicen: This family is cut to suit Meicen baseplates that use the pin-lock fixing design. Eight references are published: a reinforced neck-thorax mask at 2.4mm and 3.0mm, and chest-pelvic trunk masks in standard and standard with groin lock forms. Meicen marks the VST trunk references as compatible with its C-Series and Y-Series baseplates and the VSH references as compatible with the Supine Breast Board. Standard sheets are published at 22% perforation in 2.4mm and 38% perforation in 3.0mm, and 2.0mm and 3.2mm thicknesses can be specified at enquiry.
• Meicen C-Series AIO Baseplate MC-CF001 — Meicen: Built around a pin-lock fixing, the C-Series all-in-one baseplate supports the head, head and shoulders, thorax, pelvis and full body, and Meicen configures it for both adult and paediatric treatments. It is light in weight and carries an adjustable shoulder retractor for shoulder suppression, with several fixing locations so immobilisation can be tuned patient by patient. Compatibility covers all S-type masks, including standard and narrow shoulder versions, along with Meicen pin-lock type masks. Meicen describes the wider C-Series AIO solution as a modular system for lesions of the brain, head and neck, thorax, breast and lung, and pelvis, adding that the baseplate works with its thermoplastic masks to give submillimetre immobilisation accuracy for stereotactic treatments.
• Meicen C-Series Head & Shoulder & Breast Baseplate MC-CF002 — Meicen: This pin-lock C-Series plate is set up for the head, shoulders and breast and takes all S-Type thermoplastic masks as well as Meicen neck and breast masks. Headrest indexing uses standard silverman pins, and the plate is dual-configured so the same device serves adult and paediatric patients. Meicen lists compatibility with the Overhead Arm Support RC-ASF01 and leg positioner cushions. The underside is curved for patient comfort and several fixing positions are provided so immobilisation can be adapted to the individual.
• Meicen C-Series Pelvic Baseplate MC-CF003 — Meicen: Meicen designed the C-Series pelvic baseplate for reproducible and comfortable patient set-up, and configures it for trunk masks in small, medium and large sizes. An adjustable scale accommodates different body widths, the profile is contoured for comfort, and the sides are cut away so the plate is simple to fit and carry. A groin lock for trunk masks is offered as an option, and the plate provides positioning for a leg separator and works with the leg positioner cushions.
• Meicen C-Series Head-Shoulder Baseplate MC-CF004 — Meicen: A pin-lock design aimed at head and shoulder immobilisation, this C-Series plate accepts all S-Type thermoplastic masks and indexes headrests with standard silverman pins. Meicen publishes it at 600(L) x 606(W)/mm and states that it is dual-configured for adult and paediatric patients. Several fixing locations are available so the set-up can be matched to each patient.
• Meicen A-Series Head & Shoulder & Breast Baseplate MC-AF002 — Meicen: The A-Series head, shoulder and breast baseplate gives an adaptable set-up covering head, neck, shoulders and breast, and takes all L-Type thermoplastic masks. Meicen lists it as compatible with leg positioner cushions, the SRS Cradle MC-CR002 and further accessories that refine positioning and patient comfort. Construction is durable and lightweight, the profile is contoured for comfort, and the sides are cut away so the plate is easy to fit and to carry.
• Meicen B-Series Tilting U-Frame Head Baseplate MC-BF004 — Meicen: This B-Series head plate tilts, which lets the head be supported at a chosen angle while the set-up stays reproducible and comfortable. Meicen publishes tilting angles of 5, 10, 20, 25, 30, 35, 40 and 45 degrees and a specification of 377(L) x 306(W)/mm. It works with all U-frame masks and with every headrest type in the Meicen range.
• Meicen P-Series Head & Shoulder & Breast Baseplate MC-PF002 — Meicen: Using the SINMED Corp fixation mode, the P-Series plate opens up treatment options across the head, neck, shoulders, thorax and pelvis. It accepts all P-Type thermoplastic masks, and Meicen lists compatibility with vacuum bags, headrests, leg positioner cushions and further accessories that sharpen positioning and patient comfort. The shape is ergonomic, the sides are cut away for easy fitting and carrying, and the plate is configured for multiple treatments.
• Meicen SBRT Platform — Meicen: The platform is the base element of the Meicen S-Series SBRT Solution MC-STF001, which Meicen describes as accurate, comfortable, multi-functional and user-friendly, and compatible with couchtops of all brands. Clear and precise scale markings on the solution improve the accuracy of positioning repeatability. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Belly Bridge — Meicen: Meicen states that the paddle design on the belly and knee bridges can be adjusted left and right and up and down, so the patient's breathing range is controlled effectively during treatment. Quick-lock and unlock operation on the bridges is described as effortless, and scales are provided so fixed positions can be recorded. The breathing bridge is flexible and fully adjustable to suit different patient sizes. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Knee Bridge — Meicen: The knee bridge shares the adjustable paddle design of the belly bridge, moving left and right and up and down to help control the patient's breathing range during treatment. Locking and unlocking is quick, and scale marks let a fixed position be recorded and reproduced. Meicen notes that abundant scale marks improve the accuracy of positioning repeatability. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Wing Board T Grip — Meicen: The wing board with T grip forms part of the SBRT set-up, and Meicen states that the S-Series SBRT Solution can be used with a wing board, vacuum cushions, thermoplastic masks and a supine breast cushion to build various positioning solutions for radiation therapy. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Knee & Feet Cushion — Meicen: Cushion support for the knees and feet is supplied with the S-Series SBRT Solution. Meicen's included components grid shows the cushion pairing as Knee & Elevation Cushion and Feet Cushion. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Elevation Cushion — Meicen: The elevation cushion is listed among the components supplied with the S-Series SBRT Solution, appearing in Meicen's components grid as part of the Knee & Elevation Cushion pairing. Meicen describes the solution overall as ergonomically designed for patient comfort. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT T-Shaped Vacuum Cushion — Meicen: A T-shaped vacuum cushion is included with the S-Series SBRT Solution, and Meicen states that the solution can be used together with vacuum cushions, thermoplastic masks, a wing board and a supine breast cushion to assemble different positioning arrangements for radiation therapy. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Carbon Fiber Headrest — Meicen: A carbon fibre headrest is supplied with the S-Series SBRT Solution, and headrests appear in Meicen's included components grid for the system. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Indexing Bar — Meicen: Indexing bars are part of the S-Series SBRT Solution and allow the assembly to be located on the couchtop, which matters because Meicen states the system is compatible with the couchtops of all brands. Indexing bars appear in the included components grid for the system. Meicen lists this item among the components included with the S-Series SBRT Solution MC-STF001.
• Meicen SBRT Respiratory Belt — Meicen: A respiratory belt appears in Meicen's included components grid for the S-Series SBRT Solution MC-STF001. The system as a whole is built to control the patient's breathing range effectively during treatment, using adjustable paddles on the belly and knee bridges together with scales that record fixed positions.
• Meicen Wing Board T/U Grips MC-WBF001 / MC-WBF002 — Meicen: Meicen builds the wing board from a carbon fibre shell over a foam core, which adds stability while keeping attenuation low, and the set-up itself is simple and comfortable. Holding the patient's arms up helps secure the intended radiotherapy effect, and the board is compatible with the T and U grips and with the Meicen Supine Breast Board. Put together with a T-shaped or wing board vacuum bag, headrests and a lock bar, it forms a complete arrangement for breast and upper body treatment positioning. Meicen notes that wing boards are often used when radiation is being delivered to the chest area.
• Meicen Supine Breast Board MC-RXF002 — Meicen: Engineered for quick, simple and efficient patient positioning, this breast board is both lightweight and cost-effective. Its treatment zone is a coreless single-layer carbon fibre panel, which gives an IGRT treatment zone with minimal attenuation together with maximal homogeneity and stability. Height and size are fully adjustable, the lumbar area is contoured, and the enhanced bottomstop locks easily. The board accepts an S-Type head mask for stable, reproducible supraclavicular treatments as well as breast masks.
• Meicen Supine Breast Cushions MC-RXE001 — Meicen: These cushions fit onto Meicen C-Series and Y-Series baseplates through an adapter cushion, or they can be indexed straight onto the couchtop. The arm support cushions are shaped ergonomically for patient comfort and may be used on their own or together with the C-Series and Y-Series baseplates. Hand grips adjust easily, which sharpens both the accuracy and the comfort of repeat set-ups. A quick-lock design drops the cushions into Meicen baseplates and an indexed slot fixes them to CT couchtops.
• Meicen Prone Breast Cushions MC-RBE001 — Meicen: An adapter cushion lets this prone breast cushion install easily on Meicen C-Series and Y-Series baseplates. The breast bridge can be switched left or right to match the treatment plan, and the U-shaped cushion is available in S, M and L sizes. Its rail-type prone headrest travels in the head to feet direction and offers four levels of elevation angle, so the set-up can be matched to individual needs.
• Meicen Prone Belly Cushions MC-RPE002 — Meicen: This prone belly cushion mounts on Meicen C-Series and Y-Series baseplates by way of an adapter cushion. The rail-type prone headrest moves in the head to feet direction and has four levels of elevation angle so it can be set to individual needs. Meicen configures the cushion for both female and male treatments and notes that using it with a trunk mask improves the immobilisation effect.
• Meicen Vacuum Cushion RC-E5003 — Meicen: Chest and pelvic support is the stated application for RC-E5003, a 100cm x 70cm cushion taking a 30L fill. Specialised particles inside a coated nylon shell make the cushion air-tight and water-proof while resisting tear and stain. The polyamide is dark blue so that it stays distinguishable in optical imagers, and the material is radio-translucent and easy to clean. An indexing batten is built in and adapters are available for any pump manufacturer.
• Meicen Vacuum Cushion RM-E5003 — Meicen: This is the MR version of the 100cm x 70cm chest and pelvic support cushion, referenced RM-E5003 and taking a 30L fill; Meicen confirms MR safe vacuum cushions run across the range. Once evacuated the cushion forms rigid, secure support around the patient. Its coated nylon shell holds the specialised particle fill air-tight and water-proof and protects against tear and stain. Indexing is built in and pump adapters suit any manufacturer.
• Meicen Vacuum Cushion RC-E5005S — Meicen: Indexing is built into RC-E5005S, a 100cm x 70cm chest and pelvic support cushion with a 30L fill. High-quality polyamide in dark blue keeps the cushion distinguishable in optical imagers, and the coated nylon shell keeps it air-tight, water-proof and resistant to tear and stain. The material is radio-translucent and cleans easily, and adapters suit any pump manufacturer.
• Meicen Vacuum Cushion RM-E5005S — Meicen: RM-E5005S pairs indexing with MR safety in a 100cm x 70cm chest and pelvic support cushion taking a 30L fill. Meicen states that MR safe vacuum cushions are available across the range. Specialised particles sit inside a coated nylon shell that is air-tight, water-proof and resistant to tear and stain, and the cushion sets rigid around the patient once drawn down. Radio-translucency, easy cleaning and universal pump adapters complete the specification.
• Meicen Vacuum Cushion RC-E4013 — Meicen: Breast support is the application Meicen gives for RC-E4013, sized 70cm x 70cm with a 20L fill. The coated nylon shell holds the specialised particle fill air-tight and water-proof and shrugs off tears and stains. Dark blue polyamide keeps the cushion visible in optical imagers, and the material is radio-translucent and simple to wipe down. Adapters are available for any pump manufacturer.
• Meicen Vacuum Cushion RM-E4013 — Meicen: The MR safe build of the 70cm x 70cm breast support cushion carries the reference RM-E4013 and a 20L fill. Meicen confirms MR safe vacuum cushions across the whole cushion range. Its coated nylon shell keeps the specialised particles air-tight and water-proof and protects against tear and stain, and the cushion sets rigid around the patient. It is radio-translucent, easy to clean and indexed, with pump adapters to suit any manufacturer.
• Meicen Vacuum Cushion RC-E4014F — Meicen: RC-E4014F is the indexed 70cm x 70cm breast support cushion with a 20L fill. Its shell is coated nylon over a specialised particle fill, air-tight, water-proof and resistant to tear and stain. Ultra durable polyamide in dark blue stays distinguishable in optical imagers. The material is radio-translucent, cleans easily and works with adapters for any pump manufacturer.
• Meicen Vacuum Cushion RM-E4014F — Meicen: Indexed and MR safe, RM-E4014F is a 70cm x 70cm breast support cushion taking a 20L fill, and Meicen states MR safe versions are available across the range. Specialised particles are held inside a coated nylon shell that keeps the cushion air-tight, water-proof and protected from tear and stain. Drawn down, it forms rigid support around the patient. Radio-translucency, easy cleaning, a built-in indexing batten and universal pump adapters are all part of the specification.
• Meicen Vacuum Cushion RC-E5024 — Meicen: At 120cm x 80cm with a 32L fill, RC-E5024 is one of the larger chest and pelvic support cushions in the range. A coated nylon shell keeps the specialised particle fill air-tight and water-proof and resists tear and stain. The dark blue polyamide remains distinguishable in optical imagers and is radio-translucent and easy to clean. Indexing is built in and adapters fit any pump manufacturer.
• Meicen Vacuum Cushion RM-E5024 — Meicen: RM-E5024 is the MR safe form of the 120cm x 80cm chest and pelvic support cushion, filled to 32L, and MR safe vacuum cushions are offered across the Meicen range. The coated nylon shell holds the specialised particles air-tight and water-proof and guards against tear and stain. Once evacuated the cushion becomes rigid, secure support around the patient. It is radio-translucent, easy to clean, indexed, and takes adapters for any pump manufacturer.
• Meicen Vacuum Cushion RC-E5025S — Meicen: Indexing comes as standard on RC-E5025S, a 120cm x 80cm chest and pelvic support cushion with a 32L fill. Specialised particles inside a coated nylon shell keep it air-tight, water-proof and resistant to tear and stain. Ultra durable polyamide in dark blue stays visible in optical imagers, and the material is radio-translucent and easy to clean. Adapters are available for any pump manufacturer.
• Meicen Vacuum Cushion RM-E5025S — Meicen: Both indexed and MR safe, RM-E5025S measures 120cm x 80cm and takes a 32L fill for chest and pelvic support, and Meicen states MR safe cushions run across the range. Its coated nylon shell keeps the specialised particle fill air-tight, water-proof and protected from tear and stain. The cushion sets rigid around the patient, remains radio-translucent, cleans easily, and accepts pump adapters from any manufacturer.
• Meicen Vacuum Cushion RC-E5010 — Meicen: RC-E5010 covers chest and pelvic support at 100cm x 75cm with a 30L fill. Specialised particles are sealed inside a coated nylon shell that is air-tight, water-proof and resistant to tear and stain. High-quality polyamide in dark blue keeps the cushion distinguishable in optical imagers. It is radio-translucent, easy to clean, carries a built-in indexing batten and works with adapters for any pump manufacturer.
• Meicen Vacuum Cushion RM-E5010 — Meicen: The 100cm x 75cm chest and pelvic support cushion is also produced MR safe as RM-E5010 with a 30L fill, part of the MR safe cushions Meicen offers across the range. A coated nylon shell keeps the specialised particle fill air-tight and water-proof and resists tear and stain. Drawn down, the cushion forms rigid, secure support around the patient. Radio-translucency, easy cleaning, built-in indexing and universal pump adapters are all included.
• Meicen Vacuum Cushion RC-E5023S — Meicen: RC-E5023S is a 120cm x 75cm chest and pelvic support cushion with indexing and a 34L fill. Specialised particles inside a coated nylon shell keep it air-tight, water-proof and resistant to tear and stain. Dark blue polyamide stays distinguishable in optical imagers, and the material is radio-translucent and easy to clean. Adapters are available for any pump manufacturer.
• Meicen Vacuum Cushion RC-E5032 — Meicen: RC-E5032 is the longest cushion in the chest and pelvic group at 150cm x 75cm, and it takes a 45L fill. A coated nylon shell holds the specialised particle fill air-tight and water-proof and protects against tear and stain. Ultra durable polyamide in dark blue keeps it visible in optical imagers, and the material is radio-translucent and easy to clean. An indexing batten is built in, with pump adapters to suit any manufacturer.
• Meicen Vacuum Cushion RC-E1005 — Meicen: Meicen shapes RC-E1005 for arms-up breast support, sized 75cm x 75cm with a 15L fill. Specialised particles sit inside a coated nylon shell that is air-tight, water-proof and resistant to tear and stain. The dark blue polyamide remains distinguishable in optical imagers, and the material is radio-translucent and easy to clean. Indexing is built in and adapters fit any pump manufacturer.
• Meicen Vacuum Cushion RC-E3005F — Meicen: RC-E3005F is a T-shaped cushion for thorax and abdomen support, 125cm x 110cm with a 31L fill. Its coated nylon shell keeps the specialised particle fill air-tight and water-proof and resists tear and stain. High-quality polyamide in dark blue stays distinguishable in optical imagers. The cushion is radio-translucent, easy to clean, indexed, and works with adapters for any pump manufacturer.
• Meicen Vacuum Cushion RC-E3010F — Meicen: Sharing the 125cm x 110cm T-shaped format for thorax and abdomen support, RC-E3010F takes a 32L fill. Specialised particles are sealed inside a coated nylon shell that is air-tight, water-proof and resistant to tear and stain. Dark blue polyamide keeps the cushion visible in optical imagers, and the material is radio-translucent and easy to clean. A built-in indexing batten and universal pump adapters complete it.
• Meicen Vacuum Cushion RC-E3019 — Meicen: For arms-up thorax and abdomen support, Meicen lists RC-E3019 at 105cm x 75cm with a 28L fill. A coated nylon shell holds the specialised particle fill air-tight and water-proof and guards against tear and stain. The ultra durable polyamide is dark blue so it stays distinguishable in optical imagers. It is radio-translucent, easy to clean, indexed, and accepts adapters for any pump manufacturer.
• Meicen Vacuum Cushion RC-E1004 — Meicen: RC-E1004 is the smallest cushion in the range, S-shaped for head and shoulder support at 61cm x 65cm with an 8L fill. Specialised particles inside a coated nylon shell keep it air-tight, water-proof and resistant to tear and stain. Dark blue polyamide remains distinguishable in optical imagers, and the material is radio-translucent and easy to clean. Indexing is built in and pump adapters suit any manufacturer.
• Meicen Vacuum Cushion Positioner Strip, Carbon Fiber — Meicen: Meicen lists the carbon fibre positioner strip among the accessories for its vacuum cushion range, and shows the same item on its radiotherapy accessories page as Vacuum Bag Positioner-Carbon Fiber. It is used alongside the vacuum cushions, which carry a built-in indexing batten so the cushion can be located reproducibly.
• Meicen Vacuum Cushion Positioner, Acrylic — Meicen: This acrylic positioner appears in Meicen's vacuum cushion accessories group and again on its radiotherapy accessories page as Vacuum Bag Positioner-Acrylic. It serves the vacuum cushion range, where each cushion carries a built-in indexing batten for reproducible placement.
• Meicen Vacuum Pump — Meicen: Meicen supplies a vacuum pump within the accessories for its vacuum cushion range. The company states that adapters are available for any manufacturer's pump, so the cushions can be evacuated with existing departmental equipment as well.
• Meicen Carbon Fiber Headrests — Meicen: Carbon fibre headrests head the accessories range that Meicen publishes for radiotherapy positioning. The same headrest image runs on the S-Series SBRT Solution page, where headrests are listed among the included components. Meicen also lists headrest compatibility on its C-Series, A-Series and B-Series baseplates, with the C-Series plates indexing headrests using standard silverman pins.
• Meicen S-type Color Headrest — Meicen: Meicen publishes the S-type colour headrest within its radiotherapy accessories range. The same headrest is shown on the C-Series Head & Shoulder & Breast Baseplate MC-CF002 page under compatible headrests, where headrest indexing uses standard silverman pins.
• Meicen A-type Color Headrest — Meicen: The A-type colour headrest is one of the headrest options listed in Meicen's radiotherapy accessories range. Meicen lists headrest compatibility across its baseplate series, and states that the B-Series Tilting U-Frame Head Baseplate works with Meicen headrests of every type.
• Meicen Clear Headrest — Meicen: Meicen lists a clear headrest in its radiotherapy accessories range, and the same clear headrest appears among the components of the MR safe Meicen MR SBRT System. All Meicen MR positioning devices can be operated in both MRI and treatment environments.
• Meicen Indexing Bars For V-style Couchtops — Meicen: These indexing bars are published for couchtops of the V-style pattern within Meicen's radiotherapy accessories range. Indexing bar compatibility is listed on the Meicen C-Series Pelvic Baseplate, A-Series Head & Shoulder & Breast Baseplate, B-Series Tilting U-Frame Head Baseplate and P-Series baseplate pages, and indexing bars are also included with the S-Series SBRT Solution.
• Meicen Shoulder Retractor — Meicen: Meicen publishes the shoulder retractor in its radiotherapy accessories range. On the C-Series AIO Baseplate MC-CF001 the company describes an adjustable shoulder retractor fitted for shoulder suppression, and lists comfortable shoulder retraction among that baseplate's features.
• Meicen MR SBRT System, S-Series SBRT Solution MC-STG001-A1, MR Safe — Meicen: Meicen states that all of its MR positioning devices can be operated in MRI and treatment environments, and that professional materials and clinical data are used to assure high-precision, comfortable immobilisation. The MR SBRT System is described as a highly accurate, advanced and multi-functionally non-invasive solution allowing high-precision immobilisation for stereotactic radiosurgery treatments. Height on the belly and knee bridges, and the locks that hold them, can be adjusted and locked quickly for simple operation. Meicen publishes the system as MR Safe and as EU MDR, ISO and FDA compliant.
• Meicen C-Series AIO Baseplate, MR Safe — Meicen: Meicen states that all of its MR positioning devices can be operated in MRI and treatment environments, and that professional materials and clinical data are used to assure high-precision, comfortable immobilisation. The C-Series AIO Baseplate is shown on the MRI Solutions page among Meicen's other MR safe baseplates. Meicen adds that all of its immobilisation baseplates for radiotherapy positioning are provided with MR safe materials.
• Meicen A-Series AIO Baseplate, MR Safe — Meicen: Meicen states that all of its MR positioning devices can be operated in MRI and treatment environments, and that professional materials and clinical data are used to assure high-precision, comfortable immobilisation. The A-Series AIO Baseplate appears on the MRI Solutions page in the group of other MR safe baseplates. According to Meicen, every one of its immobilisation baseplates for radiotherapy positioning is provided with MR safe materials.
• Meicen Y-Series AIO Baseplate, MR Safe — Meicen: Meicen states that all of its MR positioning devices can be operated in MRI and treatment environments, and that professional materials and clinical data are used to assure high-precision, comfortable immobilisation. A further AIO baseplate is carried in the MR safe baseplate group on the MRI Solutions page, identified on Meicen's own server as the Y-Series device. Meicen states that all of its immobilisation baseplates for radiotherapy positioning are provided with MR safe materials.
• Meicen Supine Breast Board, MR Safe — Meicen: Meicen states that all of its MR positioning devices can be operated in MRI and treatment environments, and that professional materials and clinical data are used to assure high-precision, comfortable immobilisation. The Supine Breast Board is listed on the MRI Solutions page alongside the MR safe baseplates. Meicen states that all of its immobilisation baseplates for radiotherapy positioning are provided with MR safe materials.

All Medical Equipment categories