Electrical Machines Lab in Bangladesh

EDIBON teaching and research units for the electrical machines laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included. 39 units available.

39 products from 1 manufacturer: EDIBON.

Products

• AEL-SPTT: Single-Phase Transformer Application — EDIBON: A panel based application for single-phase transformer testing. Students carry out the open circuit and short circuit tests, take the load characteristic and determine the equivalent circuit parameters, wiring the measuring instruments themselves on the modular rack.
• TPTC: Three-Phase Transformer Construction Unit — EDIBON: A training unit for building and commissioning three-phase transformers. Students wind the coils with a hand winder, assemble the core, connect the windings and then measure the finished machine before putting it into service.
• AEL-ACEM: AC Three-Phase Induction Motors Application — EDIBON: A base rack of power supplies, push buttons, three-phase autotransformer, AC ammeter, circuit breakers, timers and flywheel, completed by motor options. Each option adds a different machine with its own modules so a range of induction motor manoeuvres can be wired.
• AEL-TPTT: Three-Phase Transformer Application — EDIBON: Covers the operating principles of three-phase transformers and the tests used to find their parameters. Students carry out the standard tests, connect the windings in different arrangements and derive the equivalent circuit of the machine.
• AEL-ACINA: Application of AC Three-Phase Induction Motor of Squirrel Cage — EDIBON: Covers the manoeuvres performed on squirrel cage induction motors in industry, wired by the student using commutators, timers and contactors. Direct on line starting, reversing and sequenced control are all built up from the modules on the rack.
• AEL-ACEMT: Advanced AC Electrical Motors Application — EDIBON: A test bench for electrical and mechanical characterisation of a range of AC motors. The tests yield the significant machine characteristics, and the EM-SCADA software can be added to acquire the data and plot the curves from a computer.
• AEL-ACWRA: Application of AC Three-Phase Induction Motor of Wound Rotor — EDIBON: Covers the operations performed with wound rotor induction motors, including rotor resistance starting and the speed control it allows. The student wires the power and control circuits with commutators, timers and contactors on the modular rack.
• AEL-ACDHA: Application of AC Dahlander Three-Phase Induction Motor — EDIBON: Covers the pole changing Dahlander motor and the two speed manoeuvres carried out with it in industry. The student wires the power and control circuits using commutators, timers and contactors, then measures the machine at each speed.
• AEL-DCGEA: DC Generators Application — EDIBON: Covers the operations carried out with DC generators, using loads and voltage controllers on the modular rack. Students take the no load and load characteristics and study how excitation and driving speed affect the terminal voltage.
• AEL-EMSS: Electrical Machines Soft Starters Application — EDIBON: Teaches the use of soft starters with three-phase machines. The application takes optional starter types, including an electronic soft starter module, so students compare starting current and torque against direct on line starting.
• AEL-EEA: Alternators Study Application — EDIBON: Covers the behaviour of three-phase synchronous generators with independent excitation. A motor-generator group and a set of measuring modules let students take the no load and load characteristics and study excitation and voltage regulation.
• AEL-EMCF: Electrical Machines Control through Frequency Controller Application — EDIBON: Teaches commissioning and use of frequency controllers with three-phase induction machines. Students set the drive parameters, run the motor over a speed range and observe how frequency and voltage together determine speed and torque.
• AEL-DCIE: DC Independent Excitation Motors Application — EDIBON: Covers the manoeuvres carried out with separately excited DC motors, wired by the student with commutators, timers and contactors. Starting, reversing and speed control by armature and by field are all studied on the modular rack.
• AEL-DCEMT: DC Electrical Motors Applications — EDIBON: A test bench for electrical and mechanical characterisation of a range of DC motors. The tests give the significant machine characteristics, and the EM-SCADA software can be added so results are acquired and plotted from a computer.
• AEL-DCPMA: DC Permanent Magnet Motors Application — EDIBON: Covers the operations performed with permanent magnet DC motors, wired by the student using commutators, timers and contactors. Starting, reversing and speed control are studied together with the behaviour of the machine under load.
• AEL-DCBRA: DC Brushless Motor Application — EDIBON: Covers brushless DC machines and the electronic commutation they require. The student works through the usual industrial manoeuvres using the motor's own control system, observing how the drive sequences the windings and regulates speed.
• AEL-UMA: Universal Motor Application — EDIBON: Covers the universal motor, which runs on both AC and DC supplies, and the manoeuvres performed with it in industry. The student wires the control circuit with commutators, timers and contactors and compares behaviour on each supply.
• AEL-EMT-KIT: Advanced Dissectible and Configurable Electrical Machines — EDIBON: A dissectible and configurable machine set for theoretical and practical training. The stator and rotor parts can be exchanged and rewired so that several different machine types are built from the same components, then run and measured on the bench.
• AEL-STMA: Stepper Motor Application — EDIBON: Covers stepper motors and the sequencing needed to control them. Students set up the drive, work through the control of the step sequence and observe how step rate and load affect the accuracy of positioning.
• EM-SCADA: Control and Data Acquisition System Software for Electrical Machines — EDIBON: Control and data acquisition software for EDIBON machine benches. It records and analyses the performance of rotating and static machines, including three-phase and single-phase AC motors, synchronous generators and DC motor generators.
• AEL-DCSH: DC Shunt Excitation Motors Application — EDIBON: Covers the operations carried out with shunt wound DC motors, principally starting and stopping, speed control and reversal. The student wires the power and control circuits on the modular rack and measures the machine under load.
• AEL-ACLA: Application of AC Linear Motor Operations — EDIBON: Designed by EDIBON, the Application of AC Linear Motor Operations, "AEL-ACLA", is used to study how AC linear induction motors (LIM) work.
• AEL-ACRL: AC Three-Phase Reluctance Motors Application — EDIBON: Designed by EDIBON, the AC Three-Phase Reluctance Motors Application, "AEL-ACRL", is used to study the working principle and the main industrial operations carried out with three-phase reluctance motors.
• AEL-ACSPA: Application of Asynchronous Single-Phase Motor with Split Phase — EDIBON: The main operations carried out in industry with split-phase electrical motors are studied using the Application of Asynchronous Single-Phase Motor with Split Phase, "AEL-ACSPA".
• AEL-AI12: Alternating Current Motors Application — EDIBON: Designed by EDIBON, the Modular Application (AC Motors), "AEL-AI12", instructs students in the most important operations of alternating current motors.
• AEL-AI13-C: Electrotechnics Application (Motors) — EDIBON: Designed by EDIBON, the Electrotechnics Application (Motors), "AEL-AI13-C", is used to study different motor types, including the single-phase induction motor with starting and running capacitor, the universal motor, and the three-phase squirrel cage induction motor.
• AEL-EEEM: Energy Efficiency in Electrical Motors Application — EDIBON: Designed by EDIBON, the Energy Efficiency in Electrical Motors Application, "AEL-EEEM", helps students understand how advanced devices used in high-performance systems control electrical motors: frequency controllers versus conventional electrical power.
• AEL-EGMG24: Motor-Generator Group — EDIBON: Designed by EDIBON, the AEL-EGMG24 Motor-Generator Group is used to study the behaviour of a permanent magnet alternator under main motor control.
• AEL-EMRP: Electrical Machines Relays Protection Application — EDIBON: Designed by EDIBON, the Electrical Machines Relays Protection Application, "AEL-EMRP", is used to study the elementary protections for three-phase squirrel cage induction motors.
• AEL-ESAM: Faults Simulation Application in Electrical Motors — EDIBON: Designed by EDIBON, the Faults Simulation Application in Electrical Motors, "AEL-ESAM", is used to simulate non-destructive faults in three-phase motors and to apply diagnostic and localization techniques.
• AEL-FTM: Transparent and Functional Motors Application — EDIBON: Designed by EDIBON, the Transparent and Functional Motors Application, "AEL-FTM", provides theoretical-practical and functional level training on electric rotating machines.
• AEL-MMRT: Motor Management Relays Application — EDIBON: Designed by EDIBON, the Motor Management Relays Application, "AEL-MMRT", is used to study the behaviour of three-phase induction motors when they are managed with a PLC.
• AEL-SCIMS: Squirrel Cage Induction Motors Starter Application — EDIBON: Designed by EDIBON, the Squirrel Cage Induction Motors Starter Application, "AEL-SCIMS", is used to study the starting and control methods of three-phase squirrel cage induction motors in industrial installations.
• AEL-DCCO: DC Compound Excitation Motors Application — EDIBON: The main operations carried out in industry with DC compound excitation motors are studied using the DC Compound Excitation Motors Application, "AEL-DCCO".
• AEL-DCEMA: DC Electrical Motors Application — EDIBON: Theoretical and practical training in the most important operations carried out with different DC electric motors is provided by the DC Electrical Motors Application, "AEL-DCEMA", including the DC motor with independent excitation, the DC motor with series excitation, the DC motor with shunt excitation, the DC motor with compound excitation and the DC motor with permanent magnets.
• AEL-DCSE: DC Series Excitation Motors Application — EDIBON: The main operations carried out in industry with DC Series Excitation Motors are studied using the Application of DC Series Excitation Motor, "AEL-DCSE".
• AEL-DCSHT: DC Shunt Excitation Motor Application — EDIBON: Designed by EDIBON, the Shunt Excitation Motor Application "AEL-DCSHT" is used to study the electrical characteristics and mechanical parameters of shunt wound DC motors.
• AEL-AI13-D: Electrotechnics Application (Transformers) — EDIBON: Designed by EDIBON as a basic application, the Electrotechnics Application (Transformers), "AEL-AI13-D", introduces students to the basic concepts of how three-phase and single-phase transformers work.
• AEL-ESAT: Fault Simulation Application in Three Phase Transformers — EDIBON: Designed by EDIBON, the Fault Simulation Application in Three Phase Transformers, "AEL-ESAT", simulates non-destructive faults in three-phase transformers and applies diagnostic and localization techniques.

All Scientific & Laboratory Equipment categories