Dialysis & Therapy Chairs in Bangladesh

Treatment chairs from Digiterm of Hungary, a specialist manufacturer of dialysis and therapy seating for 35 years, compliant with the EU Medical Device Regulation.

25 products from 2 manufacturers: Digiterm, Saikang Medical.

Products

• Diacare-3 — Digiterm: Therapy chair designed for the needs of high-end medical clinics, with a composite plastic underframe that is self-supporting without steel components to minimise the risk of corrosion. Four motors come as standard for backrest, seat tilt, legrest and seat height, with a 200 kg maximum patient load.
• Comfort-4 Plus — Digiterm: Treatment chair with an intelligent control system and a 16 button handset, including a red button for the Trendelenburg position. Its electrical control box was specifically designed to be ready for soft start and stop or several audio options, with four motors as standard and a seat height range of 55 to 77 cm.
• Comfort-4 Scale — Digiterm: Therapy chair whose added function is to measure the weight of patients undergoing dialysis treatment, with an approved scale accuracy of 100 g and a 200 kg maximum patient load. Adjustment runs on 4+1 electric motors covering backrest, seat tilt, legrest, seat height and an optional motorised footrest.
• Comfort-4 Battery — Digiterm: Therapy chair with a 24 V, 1.2 Ah rechargeable back-up supply that keeps the chair working during mains power failures. One full charge is sufficient to operate the actuators multiple times in case of emergency or patient transfer, and an extended 2.4 Ah battery is available as an option.
• Comfort-4 Eco — Digiterm: Therapy chair with variable height and exchangeable upholstery, where height adjustment provides a low entry position for the patient but a comfortably high setup for the nursing staff during treatment. Seat height range is 55 to 77 cm and the maximum patient load is 200 kg.
• Comfort-3 Flex — Digiterm: Slim chair with a long legrest and footrest for the patient's comfort during long term treatments, available in fixed and adjustable height versions. It reaches a perfect horizontal bed position and a real Trendelenburg position of at least 12 degrees in compliance with EN 60601-2-52.
• Comfort-3 Scale — Digiterm: Therapy chair with an integrated weighing system and a touch screen patient terminal, giving continuous measurement of the patient's weight to 100 g accuracy up to a 200 kg load. The weight is displayed at the chair and can optionally be forwarded to central management systems over medical Wi-Fi.
• Comfort-3 Eco — Digiterm: Slim chair with a lower seat height for easier entry from the front side, targeting segments where treatment time is shorter, up to about two hours. Digiterm states its size saves at least 15 per cent of useful floorspace in the clinic.
• Comfort-3 Indoor Patient Transport Chair — Digiterm: Indoor transport chair for moving patients between treatment rooms, diagnostic areas and recovery zones. It carries a powder coated high tensile steel push bar with multiple grip options, a 5th wheel for manoeuvring in tight spaces, and 7.5 cm twin wheel castors with total lock.
• Comfort-2 Flex — Digiterm: Dialysis chair with exchangeable upholstery and three motors as standard for backrest, legrest and seat tilt, with an optional footrest. Maximum patient load is 200 kg and it runs on four 7.5 cm twin wheel castors with total lock.
• Comfort-2 Eco — Digiterm: Therapy chair with two motors as standard for backrest and legrest, and optional seat tilt and footrest. Seat height is fixed at 65 cm, maximum patient load is 200 kg, and the upholstery is blood resistant artificial leather that also resists disinfectants and urine.
• Comfort-1 Eco — Digiterm: Treatment chair on which one motor moves the backrest and the legrest simultaneously, with an electrical control box designed to be ready for soft start and stop or several audio options. Seat height is fixed at 55 cm, maximum patient load is 180 kg, and it runs on four 7.5 cm twin wheel castors with total lock.
• SKE087 Hospital Recliner Chair — Saikang Medical: A hospital recliner finished in super strength PU material that Saikang describes as environmentally sound. A solid wood rotary table swings across the chair with a smooth, comfortable surface. The table gives the patient somewhere to put a cup.
• SKE088 Medical Chair — Saikang Medical: A portable blood donation chair measuring 1500x520x520mm externally. Backrest angle runs from 20 to 65 degrees and the leg rest from 0 to 15 degrees. Saikang publishes a weight figure of 200kg for the chair.
• SKE090 Blood Donation Chair — Saikang Medical: Designed for blood collection and the rest period that follows, the SKE090 keeps its structure simple and its operation straightforward. A plastic steel frame gives stability and durability while remaining easy to clean. The PU leather surface is filled with high quality sponge, and the seat measures 910x480x960mm.
• SKE091 Blood Donation Chair / Hospital Recliner Chair — Saikang Medical: Environmental plastic that can be sterilised at 100°C with tensile strength up to 30MPa is used throughout the SKE091. Panasonic robotic welding produces a 360 degree smooth weld on the frame. Seat height is set at 540mm on ergonomic grounds.
• SKE941 Hospital Recliner Chair for Elderly — Saikang Medical: A recliner aimed at elderly patients, dropping to a lowest position of 560mm so that sitting down is easier. The frame is welded by Panasonic robots for a 360 degree smooth weld. Five inch castors with brakes make the chair easy to move and it carries up to 113kg.
• SKE942 Hospital Recliner Chair for Elderly — Saikang Medical: The SKE942 measures 1205x668x1180mm and drops to a lowest position of 520mm so that patients can sit down easily. Backrest angle runs from 37 to 61 degrees and the leg rest from 13 to 36 degrees, with a safe working load of 113kg. Five inch braked castors and a 650x390mm tray are fitted, and the frame carries Panasonic robotic 360 degree welding.
• SKE943 Hospital Recliner Chair for Elderly — Saikang Medical: This recliner drops to a lowest position of 520mm, which makes sitting down straightforward for elderly patients. A plastic foot pedal is fitted that adjusts for height and folds away. Panasonic robotic welding gives the frame a 360 degree smooth weld.
• SKE-133 Electric Dialysis Chair — Saikang Medical: A European styled dialysis chair in a four section ergonomic layout, measuring 2000x580mm with an 80mm mattress. The backrest travels from -8 to 70 degrees and the knee rest from -60 to 0 degrees, with height adjustment between 550 and 700mm and CPR provision. Armrests swing out through a full 180 degrees and the donor can control the universal position. A hand controller, two arm supports, four 3 inch braked wheels and a small dining table are supplied.
• SKE-134 Electric Dialysis Chair — Saikang Medical: The SKE-134 is a 1930x580mm dialysis chair on the same four section European ergonomic design, built from environmental plastic that can be sterilised at 100°C with tensile strength up to 30MPa. Backrest travel is -8 to 70 degrees, knee rest -50 to 0 degrees, and height adjusts between 550 and 700mm with CPR provision. The foot board moves through 150mm and the armrests swing out to 180 degrees.
• SKE-135 Electric Dialysis Chair — Saikang Medical: Two powered functions are provided on the SKE-135, backrest and leg rest lifting, within a four section European ergonomic design measuring 1800x550mm. Backrest travel is -10 to 70 degrees and leg rest -70 to 0 degrees, with the armrest swinging out through 270 degrees. Seat height is 550mm and the mattress is 60mm thick. It runs on 100 to 240V at 50/60 Hz with a hospital grade plug supplied to requirement.
• SKE-188A Electric Dialysis Chair — Saikang Medical: A dialysis chair in the four section European ergonomic design, made from environmental plastic that can be sterilised at 100°C with tensile strength up to 30MPa. The frame is welded by Panasonic robots to give a 360 degree smooth weld.
• Comfort-1 Eco Indoor Patient Transport Chair — Digiterm: Newest of the flexible and economic Comfort-1 line, this indoor patient transport chair joins the safety and comfort of a traditional therapy chair to the mobility of a stretcher. Seat height is fixed at 55 cm with the seat position set at 7 degrees, the backrest travels through 80 degrees and reaches 7 degrees below horizontal for the Trendelenburg position, and the legrest adjusts through 85 degrees. The chair weighs 65 kg and takes a 180 kg weight capacity, running on 24V DC motors rated IP44 from a 100-240V AC supply. Universal push bar, foldable side barriers, oxygen tank holder and extra large 20 cm front wheels are the headline options Digiterm lists for smoothing in-hospital transfers.
• Comfort-2 Eco +TMS Option Set — Digiterm: This option set adapts the Comfort-2 Eco to the particular demands of Transcranial Magnetic Stimulation therapy. A multiply adjustable headrest and neck support hold the cranium steady through treatment while flexing to match each patient's anatomy, and a special backrest construction takes the coil holder so the coil stays immobile through a long TMS session; the coil and coil holder shown by Digiterm are illustrative and not part of its product range. The underlying Comfort-2 Eco is the simplest and most popular member of the Digiterm family, giving backrest and legrest adjustment from two standard motors and staying comfortable through treatments of 4 to 6 hours. Seat tilt and footrest motorisation are available as options, and the 11 button handset sits in a liquid proof IP 67 housing.

All Medical Equipment categories