Mattresses & Pressure Care in Bangladesh
Hospital mattresses and pressure redistribution surfaces for ward beds, ICU beds and long stay patients.
10 products from 1 manufacturer: Saikang Medical.
Products
- SKP003 Mattress — Saikang Medical: A flexible waterproof cover protects this ward mattress and lifts off easily for cleaning. Inside, the core is polyurethane foam with high density sponge, published at 28 kg/m3. At L1925 mm x 900 mm it is the standard size to match each hospital bed, offered flat or in 2 or 4 sections, with blue and green as the colour options. Saikang publishes SKP003 on two pages: one gives thickness as adjustable, the other as 10 cm.
- SKP013 Tubular Air Mattress — Saikang Medical: Quick CPR deflation and near-silent running are the headline features of this tubular alternating pressure system, whose pump also offers a static function. High frequency welding keeps the 18 nylon TPU bladders stable and resistant to leaking over long service, under a nylon PU cover. The mattress measures 2000 x 900 x 115 mm ±10 mm and carries a load of 145 kg. Power is 110V/220V at 50Hz/60Hz, with 6-8 L/min air output, 6-16 kPa output pressure and a 10-12 min cycle.
- SKP011 Sectional Memory Foam Mattress — Saikang Medical: Thermo active properties give this sectional mattress its support and its pressure relief. Standard dimensions are 1920 mm long, 870 mm wide and 100 mm high, each of which can be customised, with a safe working load of 200 kg. Dark blue and grey are the colour options.
- SKP028 Pressure Relieving Mattresses with Gel — Saikang Medical: Gel is worked into this pressure relieving mattress, which is closed by a safe zip design that guards against leakage and makes disinfection easy. It measures 2000 mm long by 900 mm wide, with height to order, and takes a safe working load of 200 kg. The cover carries a BS EN 597 fire rating and can be specified in blue or grey.
- SKP040 Full Area Pressure-Relief Mattress — Saikang Medical: Pressure relief here is spread across the full area of the mattress. The PU material cover is waterproof and replaceable, and the safe zip design keeps fluids out while allowing easy disinfection. Length is 2000 mm and width 900 mm with height to order, rated to a 200 kg safe working load, in blue or grey.
- SKP041 Pressure-Relieving Mattress — Saikang Medical: A waterproof PU cover protects this pressure relieving mattress and can be replaced when needed, while the safe zip design resists leakage and keeps disinfection simple. Saikang publishes it at 2000 mm long by 900 mm wide, with customisable height and a safe working load of 200 kg. Blue and grey are the optional colours.
- SKP006 Air Mattress — Saikang Medical: Free to bend from multiple angles, this air mattress follows the patient as they are turned. Integrated heat sealing gives good sealing at the seams, so there is no cracking or air leakage. Saikang states that it has passed ISO, CE and FDA.
- SKP008 Mattress — Saikang Medical: At L1925 mm x 900 mm, this mattress is the standard size to match each hospital bed. Thickness is adjustable to order. Flat, 2 section and 4 section versions are optional.
- SKP012 Air Mattress — Saikang Medical: Eighteen nylon PVC air bladders under a nylon PU cover make up this alternating pressure system, which measures 2000 x 900 x 115 mm ±10 mm. A CPR function is built in and load capacity is 145 kg. The pump runs on 110V/220V at 50Hz/60Hz, delivering 6-8 L/min at an output pressure of 6-16 kPa on a 10-12 min cycle.
- SKP015 Air Mattress — Saikang Medical: Double CPR valves vent this mattress quickly in an emergency, and the pump stays very quiet, holds a reasonable temperature over long use and has an automatic locking function. Nineteen nylon TPU bladders sit under a nylon PU cover in a mattress of 2000 x (800-900) x 205 mm ±10 mm, rated to 180 kg. Supply is 110V/220V at 50Hz/60Hz, with 6-8 L/min air output, 6-16 kPa output pressure and a 10-12 min cycle.
All Medical Equipment categories