Mechatronics Lab in Bangladesh

EDIBON teaching and research units for the mechatronics laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included. 33 units available.

33 products from 1 manufacturer: EDIBON.

Products

• AE-PLC-FMS1: Flexible Manufacturing System for Transport, Assembly, Pressing, Selection, Screwing, and Storage — EDIBON: A configurable flexible manufacturing system covering transport, assembly, pressing, selection, screwing and storage. The stations are linked into one production line so students study cell integration and Industry 4.0 practice.
• AE-PLC-FMS5: Flexible Manufacturing System for Transport, Classification, Selection, and Pneumatic Handling — EDIBON: A configurable flexible manufacturing system covering transport, classification, selection and pneumatic handling. The linked stations let students program and integrate a complete automated production line.
• AE-PLC-T: Linear Transport Workstation — EDIBON: A closed loop conveyor driven by an electric motor that moves the pallets carrying the parts around the system, commanded by a PLC. Stopping places along the loop allow work to be carried out at each station.
• AE-PLC-FMS15: Flexible Manufacturing System for Feeding, Assembly, Robotic Handling, and Transport — EDIBON: A configurable flexible manufacturing system covering feeding, assembly, robotic handling and transport. Including a robot in the cell lets students program the arm alongside the PLC controlled stations.
• AE-PLC-RFID: RFID Identification Workstation — EDIBON: A workstation that writes, reads and rewrites information on the parts using RFID technology. A conveyor brings each incoming part to the identification area, so students study part tracking through an automated line.
• AE-PLC-FMS2: Flexible Manufacturing System for Transport, Assembly, Selection, Screwing, and Storage — EDIBON: A configurable flexible manufacturing system covering transport, assembly, selection, screwing and storage. The stations work as one line so students practise integrating and programming a complete manufacturing cell.
• AE-PLC-VS: Quality Control Workstation — EDIBON: A PLC controlled quality control workstation with a colour camera that identifies the parts on a conveyor belt. According to the specification set, a pneumatic slide gate separates the parts that do not conform.
• AE-PLC-MAN: Pneumatic Handling Workstation — EDIBON: A PLC controlled pneumatic handling and sorting workstation. The colour of each incoming part is identified at the input area, and the station then takes the part and places it according to that classification.
• AE-PLC-MPS: Pieces Manipulator Workstation — EDIBON: Introduces pneumatics, electro-pneumatics and vacuum handling without assuming previous experience. Students learn the operation and the elements of each circuit while the station manipulates the parts under PLC control.
• AE-PLC-APS: Part Feeder Workstation — EDIBON: A pneumatic and electro-pneumatic workstation whose function is to supply parts and verify that they are acceptable. A pneumatic cylinder delivers the parts one by one and the checking sequence is programmed on the PLC.
• AE-PLC-AL: Storage Workstation — EDIBON: A PLC controlled automatic storage workstation that moves the parts to any chosen position in a numbered grid. Two electric linear actuators and a pneumatic manipulator make up the storage and retrieval mechanism of the store.
• AE-PLC-MR1: Rotary Table Workstation: Feeding, Quality Control and Assembly (dimensional study) — EDIBON: An automatic rotary table combining feeding, quality control and assembly, supplied from a vertical store. The dimensional check is carried out as the table indexes each part through the stations in turn.
• AE-PLC-DS: Parts Distribution Workstation — EDIBON: A PLC controlled feeder workstation that provides parts made in different colours and materials to the rest of the system. Parts are held in a vertical store and placed one by one on an exit platform by a rotary arm.
• AE-V: Vacuum Technology Unit — EDIBON: A modular panel carrying the components that make up the vacuum pneumatic system being studied. It contains everything needed to assemble and run the circuits set out in the practical exercises, so students build each arrangement.
• AE-NS: Pneumatic and Electro-Pneumatic Application — EDIBON: A modular application taking a range of optional kits and elements so that pneumatic and electro-pneumatic circuits can be configured as required. Students assemble each circuit on the panel and then test its operation.
• AE-HD: Hydraulic and Electro-Hydraulic Application — EDIBON: A modular unit taking a range of optional kits and elements so that hydraulic and electro-hydraulic circuits can be configured as required. Students assemble each circuit and measure the pressures and flows as it operates.
• CEAB: Field Bus Applications Unit — EDIBON: Designed by EDIBON, the Field Bus Applications Unit, "CEAB", provides the components needed to form a real Profibus DP Network, in which the PC serves as the master device while the unit's other components act as slave devices.
• UCP-P: Computer Controlled Process Control Unit for the Study of Pressure (Air) — EDIBON: A compressed air flow and pressure control system built to study the fundamentals of systems modelling and control, the Computer Controlled Process Control Unit for the Study of Pressure (Air), "UCP-P", was designed by EDIBON.
• UCPCN: Computer Controlled Process Control (Pneumatic Valve) — EDIBON: Several types of automatic control can be studied with the Computer Controlled Process Control (Pneumatic Valve), "UCPCN", designed by EDIBON, which can also be used to control different variables (flow, level, temperature, pressure, pH, conductivity and TDS) in several ways.
• UCPCNCV: Computer Controlled Process Control Unit (Electronic + Pneumatic Valve and Speed Controller) — EDIBON: Several types of automatic control can be studied with the Computer Controlled Process Control System (with electronic control valve + pneumatic control valve + variable speed drive), "UCPCNCV", designed by EDIBON, which can also be used to control different variables (flow, level, temperature, pressure, pH, conductivity and TDS) in several ways.
• UCPCV: Computer Controlled Process Control (Speed Controller) — EDIBON: Several types of automatic control, along with different variables such as flow, level, temperature, pressure, pH, conductivity and TDS, can be studied and controlled in several ways using the Computer Controlled Process Control Unit (Speed Controller), "UCPCV", designed by EDIBON.
• RYC-I: PID Control and Regulation of Light Intensity Unit — EDIBON: Designed by EDIBON, the PID Control and Regulation of Light Intensity Unit, "RYC-I", allows light intensity control in a closed environment to be analysed.
• RYC-P: PID Control and Regulation of Pressure Level Unit — EDIBON: Pressure control in a tank using compressed air can be studied with the PID Control and Regulation of Pressure Level Unit, "RYC-P", designed by EDIBON.
• RYC-TAG: PID Temperature Control and Regulation of Water Flow Unit — EDIBON: Designed by EDIBON, the PID Temperature Control and Regulation of Water Flow Unit, "RYC-TAG", allows heat transfer in a water flow system to be analysed.
• RYC-TAR: PID Temperature Control and Regulation of Air Flow Unit — EDIBON: Temperature control in an air flow, using a fan and a heating element, can be studied with the PID Temperature Control and Regulation of Air Flow Unit, "RYC-TAR", designed by EDIBON.
• RYC-pH: PID Control and Regulation of pH Level Unit — EDIBON: Designed by EDIBON, the "RYC-pH" PID Control and Regulation of pH Level Unit is used to study pH control in a tank through the dosing of acidic and basic solutions.
• SERIN/CCB: Servosystems Basic Unit for DC Motors — EDIBON: The "SERIN/CCB" Servosystems Basic Unit for DC Motors is intended for the study of low power servo systems. As a low power DC motor speed control trainer, it includes a breakdown simulator.
• BS5: Ovens Test Module — EDIBON: The "BS5" Ovens Test Module was designed by EDIBON so that temperature measurement techniques could be studied using several kinds of sensors placed inside the sealed enclosure that serves as the oven.
• BS8: Proximity Test Module — EDIBON: Designed by EDIBON, the "BS8" Proximity Test Module teaches techniques for detecting the proximity of objects, with emphasis on the distance at which each sensor can detect the object and the type of material it can detect.
• BS9: Pneumatic Test Module — EDIBON: Designed by EDIBON, the "BS9" Pneumatics Test Module teaches control and handling techniques for a pneumatic piston.
• BSUB: Base Unit for BS — EDIBON: Designed by EDIBON, the BSUB is a complete unit that provides signal conditioning for the output signals of many sensors and transducers that require conditioning.
• HPU: Hydraulic Power Unit — EDIBON: Designed by EDIBON, the Hydraulic Power Unit "HPU" includes all necessary components to supply pressurized working oil to EDIBON units equipped with hydraulic circuits.
• SAC: Silent Air Compressor Unit — EDIBON: Designed by EDIBON, the Silent Air Compressor Unit "SAC" supplies compressed air to the EDIBON unit that includes pneumatic circuits.

All Scientific & Laboratory Equipment categories