Electrical Installations Lab in Bangladesh

EDIBON teaching and research units for the electrical installations laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included. 70 units available.

70 products from 1 manufacturer: EDIBON.

Products

• AEL-AI13: Electrotechnics Application (RLC Circuits, Electrostatics, Motors, Transformers, Lighting) — EDIBON: A general electrotechnics rack covering electric circuits, static electricity, magnetism, motors, transformers and lighting. It gives students starting an electrical course a single platform on which each of those topics can be wired and measured.
• AEL-AI13-A: Electrotechnics Application (RLC Circuits) — EDIBON: Covers the behaviour and purpose of RLC circuits using a set of resistors, inductors and capacitors of different values. Students assemble series and parallel combinations on the panel and measure impedance, phase relationships and resonance.
• AEL-AI13-E: Electrotechnics Application (Lighting) — EDIBON: Aimed at students beginning electrical work, this application makes the difference between series and parallel connection clear using lighting devices. Different lamps are wired and the effect of each connection on the circuit is measured.
• AEL-CM1: Logical Control Operations Application — EDIBON: Covers the basic logic control operations used in industry, built from timers, push buttons, signalling lamps, contactors and thermal relays. Students wire each combination on the rack and follow the control sequence that results.
• AEL-CM2: Application of Manual Starters and Velocity Commutators with Asynchronous Motors — EDIBON: Covers how Dahlander and wound rotor induction motors are wired and controlled using manual starters and speed commutators. Students carry out the main starting and speed changing methods used with these machines in industry.
• AEL-MED: Industrial Installations Monitoring Application — EDIBON: Introduces consumption supervision in industrial installations. The rack carries a main power supply together with AC voltmeter, ammeter and further measuring modules, so students record the electrical quantities of an installation in service.
• AEL-AD33: Single-Phase Installations Faults Application — EDIBON: Covers the protective devices used in single-phase domestic installations. Faults are introduced through the safety elements so the student can see which protection operates for each kind of fault, and understand the reason it acts.
• AEL-AD33T: Three-phase Installations Faults Application — EDIBON: Covers the protective devices used in three-phase industrial installations. Students introduce different faults through the safety elements and verify which protection acts in each case and the reason for its operation.
• AEL-AE5: Protection Relays Control Application — EDIBON: Covers the operation of protection relays, including overcurrent relays that open the circuit when a previously configured current level is detected. Students set the relay characteristics and confirm the tripping behaviour under test.
• AEL-PMEI: Protection Measures in Electrical Installations Application — EDIBON: Practical training in installing and testing the main electrical protections used in housing and in industry, together with the devices in the basic circuits. Students wire the protections themselves and then verify their operation.
• WIT-IEP: Wiring Installation Training for Industrial Electrical Protections — EDIBON: A wiring trainer for the electrical protections found in industry, aimed at professional practical training. Students install, wire and test the protective devices, working to the same practices used on a real installation.
• AEL-AD13: Entry Phone Application — EDIBON: Designed by EDIBON, the Entry Phone Application, "AEL-AD13", demonstrates the functionality of an entry phone system.
• AEL-AD14: Audio and Video Entry Phone Application — EDIBON: Designed by EDIBON, the Audio and Video Entry Phone Application, "AEL-AD14", demonstrates the functionality of this kind of entry phone.
• AEL-AD24: Position Switches Application — EDIBON: Designed by EDIBON, the Position Switches Application, "AEL-AD24", demonstrates how different safety switches work, such as MBB (make before break), BBM (beak before make) and the instantaneous micro-switch.
• AEL-AD5: Lighting Application with Timer Switch — EDIBON: Designed by EDIBON, the Lighting Application with Timer Switch, "AEL-AD5", shows how timer switches and other lighting switches work.
• AEL-AD6A: Luminosity Control Application — EDIBON: How a luminosity control system works is examined using the Luminosity Control Application, "AEL-AD6A".
• AEL-AD6B: Basic Luminosity Control Application — EDIBON: Designed by EDIBON, the Basic Luminosity Control Application, "AEL-AD6B", is used to study how a luminosity control application works.
• AEL-AD9A: Heating Control Application — EDIBON: Designed by EDIBON, the Heating Control Application, "AEL-AD9A", is used to study how a heating control application works.
• AEL-AD9B: Basic Heating Control Application — EDIBON: Designed by EDIBON, the Basic Heating Control Application, "AEL-AD9B", is used to study how a heating control application works. It helps students understand the control logic of a thermostat.
• AEL-AE4: Differential Automatic Switches Application — EDIBON: Designed by EDIBON, the Differential Automatic Switches Application, "AEL-AE4", demonstrates how a differential protection switch works when an earth leakage occurs.
• AEL-AE9: Power Flux Protection Application — EDIBON: Designed by EDIBON, the Power Flux Protection Application, "AEL-AE9", is used to study protection devices that resolve network events involving reverse power flow and power factor alteration.
• AEL-CM3: Automatic Control Operations II Application — EDIBON: Designed by EDIBON, the Automatic Control Operations II Application, "AEL-CM3", instructs students in the most important operations of alternating current motors.
• AEL-CM4: Automatic Control Operations with Contactors and Sensors IV Application — EDIBON: Designed by EDIBON, the Automatic Control Operations with Contactors and Sensors IV Application, "AEL-CM4", is used to study automatic control operations with contactors and sensors connected to a load, such as induction motors, conveyor belts, lighting, etc.
• EMT1-S: Cutaway DC Independent Excitation Motor-Generator — EDIBON: A cutaway DC independent excitation motor-generator (EMT1-S) is included to allow study of the different parts of this motor type.
• EMT10-S: Cutaway 3PH Squirrel-Cage Motor, 2 speeds — EDIBON: A cutaway asynchronous three-phase motor with two independent speeds (EMT10-S) is included for studying the different parts of this motor type.
• EMT11-S: Cutaway 1PH Squirrel-Cage Motor with Starting Capacitor — EDIBON: A cutaway asynchronous single-phase motor with starting capacitor (EMT11-S) is included so the different parts of this motor type can be studied.
• EMT12-S: Cutaway Universal Motor — EDIBON: A cutaway universal motor (EMT12-S) is included to allow study of the different parts of this motor type.
• EMT14-S: Cutaway Single Phase Repulsion Motor with Brushes — EDIBON: A cutaway single-phase repulsion motor with short-circuited brushes (EMT14-S) is included for studying the different parts of this motor type.
• EMT15-S: Cutaway DC Permanent Magnet Motor — EDIBON: A cutaway DC permanent magnet motor (EMT15-S) is included so the different parts of this motor type can be studied.
• EMT16-S: Cutaway 1PH Squirrel-Cage Motor with Starting and Running Capacitor — EDIBON: A cutaway asynchronous single-phase motor with starting and running capacitor (EMT16-S) is included to allow study of the different parts of this motor type.
• EMT17-S: Cutaway 3PH Squirrel-Cage Motor with "Y" Connection — EDIBON: A cutaway asynchronous three-phase squirrel-cage motor with "Y" connection (EMT17-S) is included for studying the different parts of this motor type.
• EMT18-S: Cutaway DC Brushless Motor — EDIBON: A cutaway DC brushless motor (EMT18-S) is included so the different parts of this motor type can be studied.
• EMT19-S: Cutaway Stepper Motor — EDIBON: A cutaway stepper motor (EMT19-S) is included to allow study of the different parts of this motor type.
• EMT2-S: Cutaway DC Series Excitation Motor-Generator — EDIBON: A cutaway DC series excitation motor-generator (EMT2-S) is included for studying the different parts of this motor type.
• EMT20-S: Cutaway 1PH Squirrel-Cage Motor with Split Phase — EDIBON: A cutaway asynchronous single-phase motor with split phase (EMT20-S) is included so the different parts of this motor type can be studied.
• EMT21-S: Cutaway 3PH Reluctance Motor — EDIBON: A cutaway three-phase reluctance motor (EMT21-S) is included to allow study of the different parts of this motor type.
• EMT22-S: Cutaway 1PH shaded Pole Motor — EDIBON: A cutaway single-phase shaded-pole motor (EMT22-S) is included for studying the different parts of this motor type.
• EMT3-S: Cutaway DC Shunt Excitation Motor-Generator — EDIBON: A cutaway DC shunt excitation motor-generator (EMT3-S) is included so the different parts of this motor type can be studied.
• EMT4-S: Cutaway DC Compound Excitation Motor-Generator — EDIBON: A cutaway DC compound excitation motor-generator (EMT4-S) is included to allow study of the different parts of this motor type.
• EMT5-S: Cutaway DC Shunt/Series/Compound Excitation Motor-Generator — EDIBON: A cutaway DC shunt-series compound excitation motor (EMT5-S) is included for studying the different parts of this motor type.
• EMT6-S: Cutaway Independent Excitation 3PH Synchronous Motor-Generator — EDIBON: A cutaway AC synchronous three-phase motor alternator (EMT6-S) is included so the different parts of this motor type can be studied.
• EMT6C-S: Cutaway Permanent Magnets 3PH Synchronous Motor-Generator, 8 Poles, 24 VAC — EDIBON: Supplied as a sectioned model, the EMT6C-S is a Permanent Magnets 3PH Synchronous Motor-Generator rated 24 Vac with 8 poles. Cutting the machine away exposes the different parts of this type of electrical motor for study.
• EMT7-S: Cutaway 3PH Squirrel-Cage Motor — EDIBON: A cutaway asynchronous three-phase squirrel-cage motor (EMT7-S) is included to allow study of the different parts of this motor type.
• EMT7B-S: Cutaway 3PH Squirrel-Cage Motor, 4 Poles — EDIBON: A cutaway 3PH Squirrel-Cage Motor, 4 poles (EMT7B-S), is used to study the different parts of this type of electrical motor.
• EMT7C-S: Cutaway 3PH Squirrel-Cage Motor, 8 Poles — EDIBON: A cutaway 3PH Squirrel-Cage Motor, 8 poles (EMT7C-S), is used to study the different parts of this type of electrical motor.
• EMT8-S: Cutaway 3PH Wound Motor — EDIBON: A cutaway asynchronous three-phase motor with wound rotor (EMT8-S) is included so the different parts of this motor type can be studied.
• EMT9-S: Cutaway Dahlander Motor, 2 Speeds — EDIBON: A cutaway Dahlander three-phase motor (EMT9-S) is included to allow study of the different parts of this motor type.
• AEL-DIM-KIT: 4 Dissectible Induction Motors Application — EDIBON: Designed by EDIBON, the 4 Dissectible Induction Motors Application, "AEL-DIM-KIT", demonstrates to students the assembly, disassembly and starting-up of several types of induction motors.
• AEL-DMG-KIT: Dissectible Motors-Generators Application — EDIBON: Designed by EDIBON, the Disassembly Motors-Generators Application, "AEL-DMG-KIT", provides theoretical-practical training in the assembly of electric motors. It covers the following types: DC Compound with Shunt-Series Motor-Generator, Asynchronous Three-Phase Motor-Alternator, Asynchronous Three-Phase Motor of Squirrel Cage, Asynchronous Three-Phase Motor of Wound Rotor, Dahlander Three-Phase Motor, Asynchronous Three-Phase Motor of Two Independent Speeds, Asynchronous Single-Phase Motor with Starting Capacitor, Universal Motor, DC Permanent Magnet Motor, Asynchronous Single-Phase Motor with Starting and Running Capacitor, Asynchronous Three-Phase Motor of Squirrel Cage with "Y" Connection, DC Brushless Motor, Asynchronous Single-Phase Motor with Split Phase, Three-Phase Reluctance Motor, and Three-Phase Shaded Pole Motor.
• AEL-MGTC: Motors, Generators and Transformers Construction Application — EDIBON: Designed by EDIBON, the Motors, Generators and Transformers Construction Application, "AEL-MGTC", provides theoretical and practical training in the electromechanical construction of electrical machines such as DC motors, AC motors, and single-phase and three-phase transformers.
• WIT-EIB: Wiring Installation Training for Electrical Installations in Buildings — EDIBON: Designed by EDIBON, the Wiring Installation Training, Electrical Installations in Buildings application, "WIT-EIB", trains students at a professional-practical level in the installation, wiring and testing of building electrical installations.
• WIT-EPH: Wiring Installation Training for Entryphones — EDIBON: Designed by EDIBON, the Wiring Installation Training for Entryphones application, "WIT-EPH", trains students at a professional-practical level in the installation, wiring and testing of entryphone electrical installations.
• WIT-IEM: Wiring Installation Training for AC and DC Industrial Electrical Motors — EDIBON: Designed by EDIBON, the Wiring Installation Training for AC and DC Industrial Electrical Motors, "WIT-IEM", trains students at a practical-professional level in the installation, wiring and commissioning of industrial electric motors, both AC and DC. Through this unit, students learn how the motors themselves work and the elements necessary for their correct operation and protection.
• WIT-ILI: Wiring Installation Training for Industrial Lighting Installations — EDIBON: Designed by EDIBON, the Wiring Installation Training, Industrial Lighting Installations application, "WIT-ILI", provides training at a professional-practical level in the installation, wiring and testing of different industrial illumination lamps.
• WIT-ISE: Wiring Installation Training for Industrial Switching Elements — EDIBON: Designed by EDIBON, the Wiring Installation Training for Industrial Switching Elements unit, "WIT-ISE", trains students at a professional-practical level in the installation, wiring and testing of industrial installations based on switching units.
• WIT-ISG: Wiring Installation Training for Industrial Signalling Elements — EDIBON: Designed by EDIBON, the Wiring Installation Training, Industrial Signalling Elements application, "WIT-ISG", provides training at a professional-practical level in the installation, wiring and testing of signalling applications used in industry.
• WIT-KNX: Wiring Installation Training for Control via KNX — EDIBON: The Wiring Installation Training for Control Via KNX unit, "WIT-KNX", gives students and automation professionals a chance to explore building automation projects, KNX device installation, and ETS software programming. Covering everything from physical installation to advanced programming, this unit equips users with important practical and theoretical skills for designing projects and maintaining automation systems.
• WIT-KNX-BC: Wiring Installation Training for Blinds with KNX — EDIBON: Designed to support the study and understanding of KNX wiring practices, the WIT-KNX-BC unit is tailored specifically for the control of shutters or blinds. It offers a valuable resource for educational and professional purposes, giving hands-on experience and insight into the wiring techniques, programming and commissioning associated with KNX technology for shutter and blind control systems.
• WIT-KNX-BMS: Wiring Installation Training for Building Control via BMS — EDIBON: Tailored for building management systems (BMS), the WIT-KNX-BMS unit is designed to provide practical insight and hands-on experience in KNX wiring practices. It serves educational and professional institutions and training centres focused on building automation, helping students learn and understand the intricacies of wiring KNX devices, programming and commissioning for BMS applications.
• WIT-KNX-HVAC: Wiring Installation Training for HVAC with KNX — EDIBON: Tailored for Heating, Ventilation, and Air Conditioning (HVAC) control systems, the WIT-KNX-HVAC unit is designed to support the study and understanding of KNX wiring practices. It provides a valuable tool for educational and professional purposes, offering hands-on experience and insight into the wiring techniques, programming and commissioning associated with KNX technology for HVAC applications.
• WIT-KNX-LIC: Wiring Installation Training for Lighting with KNX — EDIBON: Tailored for lighting control systems, the WIT-KNX-LIC unit is designed to support the study and understanding of KNX wiring practices. It serves as a valuable tool for educational and professional purposes, offering hands-on experience and insight into the wiring techniques, programming and commissioning associated with KNX technology for lighting control applications.
• WIT-KNX-SFC: Wiring Installation Training for Security with KNX: Fire, Intrusion Prevention, Floods, etc. — EDIBON: Specific to security systems, the WIT-KNX-SFC unit is designed to give hands-on experience and insight into KNX wiring practices. Tailored for educational and professional purposes, it allows users to study and understand the wiring techniques, programming and commissioning involved in integrating KNX technology into security-related applications.
• WIT-MCB: Wiring Installation Training for Mains Connection and Meters in Buildings — EDIBON: Designed by EDIBON, the Wiring Installation Training, Mains Connection and Meters in Buildings application, "WIT-MCB", trains students at a professional-practical level in the installation, wiring and testing of mains connections and meters in buildings.
• WIT-MDRV: Wiring Installation Training for AC and DC Motor Drives — EDIBON: Designed by EDIBON, the Wiring Installation Training, AC and DC Motor Drives application, "WIT-MDRV", provides training at a professional-practical level in the field of electrical motor controllers.
• WIT-NETS: Wiring Installation Training for Network Systems — EDIBON: Designed by EDIBON, the Wiring Installation Training for Network Systems application, "WIT-NETS", provides training at a professional-practical level in the installation, wiring and testing of the technology used in network connections.
• WIT-PFC: Wiring Installation Training for Power Factor Correction Devices — EDIBON: Designed by EDIBON, the Wiring Installation Training, Power Factor Correction Devices application, "WIT-PFC", provides training at a professional-practical level in the installation, wiring and testing of existing power factor correction systems in industry.
• WIT-PGH: Wiring Installation Training for Power Generation Hybrid Systems — EDIBON: Designed by EDIBON, the Wiring Installation Training for Power Generation Hybrid Systems unit, "WIT-PGH", trains students at a practical and professional level in the installation, wiring and commissioning of hybrid renewable energy systems.
• WIT-PHS: Wiring Installation Training for Photovoltaic Systems — EDIBON: Designed by EDIBON, the Wiring Installation Training for Photovoltaic Systems, "WIT-PHS", provides training at a professional-practical level in the installation, wiring and commissioning of photovoltaic solar energy systems.
• WIT-SDCAC: Wiring Installation Training for Start-up of DC and AC Motor Drives — EDIBON: Designed by EDIBON, the Wiring Installation Training, Start-up of DC and AC Motor Drives, "WIT-SDCAC", provides training at a professional-practical level in the field of electrical motor controllers.
• WIT-WPS: Wiring Installation Training for Wind Power Systems — EDIBON: Designed by EDIBON, the Wiring Installation Training for Wind Power Systems unit, "WIT-WPS", provides training at a professional-practical level in the installation, wiring and commissioning of wind power energy systems.

All Scientific & Laboratory Equipment categories