Digiterm in Bangladesh

Vvon Technologies Limited supplies, installs and services Digiterm equipment across Bangladesh. 16 products are catalogued across Medical Equipment.

Categories

• Dialysis & Therapy Chairs (14)
• Ward Furniture (2)

Products

• Comfort-T1: Comfort-T1 is a mobile, height-adjustable patient table built for therapeutic and medical settings and intended as a bed-side table for all types of chairs. It suits dining, reading or intravenous therapy during a treatment session, and its low chassis slides under most treatment chairs. A hand lever sets height anywhere from 72,5 to 98 cm, the larger tray tilts through 0, 15 and 30 degrees while the smaller stays horizontal for drinks, and both plastic trays lift out for cleaning. The unit weighs 15 kg and takes a 15 kg maximum load, running on castors with individual brakes.
• MobiDock: Intensive care increasingly calls for a bank of infusion and syringe pumps dosing precisely at one bedside, and MobiDock is the heavy duty mobile stand Digiterm built to carry them. A stainless steel holding tube accepts the universal clamping solutions already on the market, so docking stations and individual pumps mount and release quickly in different combinations, while four plastic hooks on the height adjustable pole hold bags or bottles. The powder coated high tensile steel base keeps the centre of gravity low for stability under full load and wipes down easily for disinfection, and individually brakeable castors plus an ergonomic handle let nursing staff and patients move it safely. An optional extended holder takes up to 12 pump docking stations or individual pumps.
• Diacare-3: Therapy chair designed for the needs of high-end medical clinics, with a composite plastic underframe that is self-supporting without steel components to minimise the risk of corrosion. Four motors come as standard for backrest, seat tilt, legrest and seat height, with a 200 kg maximum patient load.
• Comfort-4 Plus: Treatment chair with an intelligent control system and a 16 button handset, including a red button for the Trendelenburg position. Its electrical control box was specifically designed to be ready for soft start and stop or several audio options, with four motors as standard and a seat height range of 55 to 77 cm.
• Comfort-4 Scale: Therapy chair whose added function is to measure the weight of patients undergoing dialysis treatment, with an approved scale accuracy of 100 g and a 200 kg maximum patient load. Adjustment runs on 4+1 electric motors covering backrest, seat tilt, legrest, seat height and an optional motorised footrest.
• Comfort-4 Battery: Therapy chair with a 24 V, 1.2 Ah rechargeable back-up supply that keeps the chair working during mains power failures. One full charge is sufficient to operate the actuators multiple times in case of emergency or patient transfer, and an extended 2.4 Ah battery is available as an option.
• Comfort-4 Eco: Therapy chair with variable height and exchangeable upholstery, where height adjustment provides a low entry position for the patient but a comfortably high setup for the nursing staff during treatment. Seat height range is 55 to 77 cm and the maximum patient load is 200 kg.
• Comfort-3 Flex: Slim chair with a long legrest and footrest for the patient's comfort during long term treatments, available in fixed and adjustable height versions. It reaches a perfect horizontal bed position and a real Trendelenburg position of at least 12 degrees in compliance with EN 60601-2-52.
• Comfort-3 Scale: Therapy chair with an integrated weighing system and a touch screen patient terminal, giving continuous measurement of the patient's weight to 100 g accuracy up to a 200 kg load. The weight is displayed at the chair and can optionally be forwarded to central management systems over medical Wi-Fi.
• Comfort-3 Eco: Slim chair with a lower seat height for easier entry from the front side, targeting segments where treatment time is shorter, up to about two hours. Digiterm states its size saves at least 15 per cent of useful floorspace in the clinic.
• Comfort-3 Indoor Patient Transport Chair: Indoor transport chair for moving patients between treatment rooms, diagnostic areas and recovery zones. It carries a powder coated high tensile steel push bar with multiple grip options, a 5th wheel for manoeuvring in tight spaces, and 7.5 cm twin wheel castors with total lock.
• Comfort-2 Flex: Dialysis chair with exchangeable upholstery and three motors as standard for backrest, legrest and seat tilt, with an optional footrest. Maximum patient load is 200 kg and it runs on four 7.5 cm twin wheel castors with total lock.
• Comfort-2 Eco: Therapy chair with two motors as standard for backrest and legrest, and optional seat tilt and footrest. Seat height is fixed at 65 cm, maximum patient load is 200 kg, and the upholstery is blood resistant artificial leather that also resists disinfectants and urine.
• Comfort-1 Eco: Treatment chair on which one motor moves the backrest and the legrest simultaneously, with an electrical control box designed to be ready for soft start and stop or several audio options. Seat height is fixed at 55 cm, maximum patient load is 180 kg, and it runs on four 7.5 cm twin wheel castors with total lock.
• Comfort-1 Eco Indoor Patient Transport Chair: Newest of the flexible and economic Comfort-1 line, this indoor patient transport chair joins the safety and comfort of a traditional therapy chair to the mobility of a stretcher. Seat height is fixed at 55 cm with the seat position set at 7 degrees, the backrest travels through 80 degrees and reaches 7 degrees below horizontal for the Trendelenburg position, and the legrest adjusts through 85 degrees. The chair weighs 65 kg and takes a 180 kg weight capacity, running on 24V DC motors rated IP44 from a 100-240V AC supply. Universal push bar, foldable side barriers, oxygen tank holder and extra large 20 cm front wheels are the headline options Digiterm lists for smoothing in-hospital transfers.
• Comfort-2 Eco +TMS Option Set: This option set adapts the Comfort-2 Eco to the particular demands of Transcranial Magnetic Stimulation therapy. A multiply adjustable headrest and neck support hold the cranium steady through treatment while flexing to match each patient's anatomy, and a special backrest construction takes the coil holder so the coil stays immobile through a long TMS session; the coil and coil holder shown by Digiterm are illustrative and not part of its product range. The underlying Comfort-2 Eco is the simplest and most popular member of the Digiterm family, giving backrest and legrest adjustment from two standard motors and staying comfortable through treatments of 4 to 6 hours. Seat tilt and footrest motorisation are available as options, and the 11 button handset sits in a liquid proof IP 67 housing.