Automation & PLC Lab in Bangladesh

EDIBON teaching and research units for the automation & plc laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included.

129 products from 1 manufacturer: EDIBON.

Find the right starting point

Match the automation trainer to the lesson

A PLC programming bench, a physical process workstation and simulation software teach different skills. For a university or polytechnic laboratory in Bangladesh, start with the experiments students must complete and the controller platform already used in your courses. Then compare the hardware, software and utilities needed for each teaching station.

PLC programming and interfaces

AE-PLC-SIE provides a Siemens PLC route for logic programming and PLC-to-PC communication. Specify the required input/output and HMI options; a base controller does not define the whole teaching station.

Explore AE-PLC-SIE

Physical process control

AE-PLC-CPI uses physical flow, level, pressure and temperature loops for control experiments. Ask which controller, sensors, software and supporting utilities are included in the proposed workstation.

Explore AE-PLC-CPI

Simulation and preparation

AE-AS supports 2D/3D automation simulation, PLC programming and SCADA learning. Confirm licence counts, computer requirements and compatibility before planning connections to physical laboratory equipment.

Explore AE-AS software

What to include in your enquiry

Share the course level, required experiments and number of student groups working at the same time.
Identify the preferred PLC brand, existing controller models, programming software and required interfaces.
Ask for a station-by-station list of included hardware, licences, cables, manuals and optional modules.
Provide the room layout and available utilities; agree installation, faculty training and acceptance exercises in the quotation.

Discuss your requirements

Plan an electronics and automation teaching laboratory

Products

AE-PLC-AB: ALLEN BRADLEY PLC Application — EDIBON: A PLC training application built around a current Allen Bradley controller. It covers logic programming, the different PLC programming languages and communication between the PLC and a computer, with a set of practical exercises.

AE-PLC-MIT: MITSUBISHI PLC Application — EDIBON: A PLC training application built around a current Mitsubishi controller. It covers logic programming, the different PLC programming languages and communication between the PLC and a computer, with a set of practical exercises.

AE-PLC-SIE: SIEMENS PLC Application — EDIBON: A PLC training application built around a current Siemens controller. It covers logic programming, the different PLC programming languages and communication between the PLC and a computer, with a set of practical exercises.

AE-PLC-OMR: OMRON PLC Application — EDIBON: A PLC training application built around a current Omron controller. It covers logic programming, the different PLC programming languages and communication between the PLC and a computer, with a set of practical exercises.

AE-PLC-CPI: Industrial Processes Control Workstation — EDIBON: A workstation that brings several technologies together to implement four closed control loops: flow, level, temperature and pressure. The loops are configured quickly and easily so students can compare strategies on each variable.

AE-PLC-PAN: PANASONIC PLC Application — EDIBON: A PLC training application built around a current Panasonic controller. It covers logic programming, the different PLC programming languages and communication between the PLC and a computer, with a set of practical exercises.

AE-PLC-SE: Elevator Control Application — EDIBON: Covers the electro-mechanical components that make up a modern lift, among them the position sensors, the drive and the door mechanism, and then the PLC program that coordinates them. Students write and test the control sequence.

AE-PLC-CF: Sorting Workstation — EDIBON: A PLC controlled sorting workstation that identifies the colour and the material of the incoming parts and classifies them into three different places. The modular construction makes each stage of the sorting process easy to follow.

AE-PLC-CP: Process Control Workstation — EDIBON: A PLC controlled workstation that coordinates three industrial controllers regulating level, flow, temperature and pressure in parallel. The modular construction makes the interaction between the loops easy to follow.

AE-AS: Automation System Simulation Software — EDIBON: Automation software covering SCADA control functions, PLC programming and 2D and 3D simulation of automation systems. Students build and configure a plant on screen and run their control program against the simulated machinery.

BS-PLC: Modular System for the Study of Sensors with PLC Control — EDIBON: A large set of sensor modules operated under PLC control, showing how different sensing technologies are used in common measurement and control applications. Students wire the sensors to the PLC and write the control program.

AE-PLC-FMS14: Flexible Manufacturing System for Industrial Process Control, Filling, Sealing, and Storage — EDIBON: Designed by EDIBON, the "AE-PLC-FMS14" Flexible Manufacturing System for Industrial Process Control, Filling, Sealing, and Storage enables the study and practice of an automated production cycle comprising 3 distinct workstations.

AE-PLC-FMS3: Flexible Manufacturing System for Transport, Assembly, Selection (Material and Color), and Storage — EDIBON: Designed by EDIBON, the "AE-PLC-FMS3" Flexible Manufacturing System for Transport, Assembly, Selection (Material and Color), and Storage enables the study and practice of an automated production cycle made up of 5 distinct workstations.

AE-PLC-FMS4: Flexible Manufacturing System for Filtering, Mixing, Industrial Process Control, and Bottling — EDIBON: Designed by EDIBON, the "AE-PLC-FMS4" Flexible Manufacturing System for Filtering, Mixing, Industrial Process Control, and Bottling enables the study and practice of an automated production cycle composed of 4 distinct workstations.

AE-PLC-FMS6: Flexible Manufacturing System for Feeding and Classification — EDIBON: Designed by EDIBON, the "AE-PLC-FMS6" Flexible Manufacturing System for Feeding and Classification enables the study and practice of an automated production cycle made up of 2 distinct workstations.

AE-PLC-FMS7: Flexible Manufacturing System for Feeding, Identification, Classification, and Transport — EDIBON: Designed by EDIBON, the "AE-PLC-FMS7" Flexible Manufacturing System for Feeding, Identification, Classification, and Transport allows the study and practice of an automated production cycle composed of 4 distinct workstations.

N-EM-ACC: Feeding and Loading Control — EDIBON: A voltage control with four switches in an "H" bridge is represented by "N-EM-ACC".

N-EM-CPR: Reactive Current Compensation — EDIBON: The reactive current compensation system represented by "N-EM-CPR" emulates the connection of three-phase capacitive loads.

N-EM-M: Motor Control — EDIBON: Three-phase motor-control teaching emulator for EDIBON AE-PLC units, covering direction reversal and star or delta connections.

N-EM-M2BS: Motor with 2 separate Windings — EDIBON: A three phase motor with two separate windings is represented by "N-EM-M2BS", which emulates the motor's movement.

N-EM-MAC: Starting a Wound - Rotor Motor — EDIBON: The starting of a wound-rotor motor is represented by "N-EM-MAC", where the motor's movement can be emulated when different loads are connected through three phase contactors.

N-EM-MCETI: Reversing Star-Delta Connection — EDIBON: A reversing motor with star-delta connection control, used to manage the direction of a three phase motor by configuring the connection through three phase contactors, is represented by "N-EM-MCETI".

N-EM-MCI: Reversing Contactor — EDIBON: A three-phase motor with reversing contactors is what the "N-EM-MCI" provides. It emulates a three phase motor connection in which the turning direction of the motor is changed through three phase contactors.

N-EM-MD: Dahlander Motor Circuit — EDIBON: A Dahlander motor circuit is represented by "N-EM-MD"; it has two connection configurations for connecting 2 and 4 poles and emulates the motor's movement.

N-EM-MET: Star-Delta Connection — EDIBON: A star-delta connection of a three phase motor is represented by "N-EM-MET".

N-EM-MPP: Stepper Motor Control — EDIBON: "N-EM-MPP" is a representation of a stepper motor control used to manage the direction, speed, and position of a stepper motor.

N-EM-AC: Buffer Storage — EDIBON: A buffer storage system is represented by "N-EM-AC"; it emulates a solar thermal system used to collect and store heat from the sun.

N-EM-CCO: Sluice Gate Control — EDIBON: A sluice gate control system is represented by "N-EM-CCO".

N-EM-CME: Mixer Control — EDIBON: A mixer control system handling two different products in a central tank is what the "N-EM-CME" sets out.

N-EM-CML: Liquids Mixing Control — EDIBON: A liquids mixing control inside a tank with four feeding pipes is represented by "N-EM-CML".

N-EM-CNC: Level and Flow Control — EDIBON: A level and flow control system, composed of a pressurized circuit with a pneumatic valve that regulates the flow rate of the main water tank, is represented by "N-EM-CNC".

N-EM-CNTA: Water Tower Level Control — EDIBON: A water tower level control is represented by "N-EM-CNTA", where the water flow control can be emulated using the input valve and the motor of the pump.

N-EM-CS: Silo Control — EDIBON: Silo-filling teaching emulator for EDIBON AE-PLC units, combining adjustable filling and discharge with level-sensor feedback.

N-EM-PLLT: Filling Process of Tanks — EDIBON: A filling process system is represented by "N-EM-PLLT"; it is composed of three tanks that fill the tank where the desired product is mixed.

N-EM-RT: Temperature Regulation — EDIBON: The temperature regulation system of a house is represented by "N-EM-RT", which allows the temperature to be controlled using a heater element inside a tank and temperature sensors.

N-EM-SALL: Automatic Filling System — EDIBON: The "N-EM-SALL" sets out an automatic filling system, complete with a filling and corking system.

N-EM-SBAR: Dirty-Water Pump System — EDIBON: A dirty-water pump system is represented by "N-EM-SBAR"; it emulates the control of the dirty-water flow using a valve and two pumps that move the dirty-water pipe from a dirty-water tank.

N-EM-SBP: Pump System (Pressure) — EDIBON: A pressure system is represented by "N-EM-SBP"; it emulates two pumps that fill a tank.

N-EM-SCA: Canalization System — EDIBON: A canalization system that provides water to two houses through two pipes with a valve is represented by "N-EM-SCA".

N-EM-AN: Annunciator — EDIBON: An access control system with a seven-digit display and keypad is represented by "N-EM-AN".

N-EM-CA: Elevator Control — EDIBON: A three-floor elevator is represented by "N-EM-CA"; it emulates the control of the elevator cabin's movement, the opening and closing of the doors, the indicators of an elevator control panel, etc.

N-EM-CA2P: Two-Doors Access Control — EDIBON: Two automatic doors are represented by "N-EM-CA2P", where the movements and positions of each automatic door can be emulated using sensors and electrical motors.

N-EM-CF: Photo Control — EDIBON: A photomaton is modelled by the "N-EM-CF". It emulates the sequence of actions carried out by the system to make and print the photos.

N-EM-CI: Fire Control — EDIBON: A fire control station is represented by "N-EM-CI", where different emergency situations involving fire can be emulated.

N-EM-CLA: Automatic Washing Machine Control — EDIBON: An automatic washing machine is represented by "N-EM-CLA"; it emulates the sequence of actions carried out when the different programs are selected.

N-EM-CP: Proximity Control (security) — EDIBON: A proximity and presence security control is represented by "N-EM-CP", where information about presence in different places of a bank office can be obtained using a PIR sensor, presence sensor, magnetic sensor, and infrared electronic barriers.

N-EM-CSC: Heating System Control — EDIBON: A heating control system of a house is represented by "N-EM-CSC"; it emulates a home heating system with a heating circuit and two radiators.

N-EM-CTI: Tower Lighting Control Module — EDIBON: "N-EM-CTI" corresponds to an automatic tower light control.

N-EM-MB: Drinks Machine — EDIBON: An automatic drinks machine is represented by "N-EM-MB"; it emulates the sequence of actions carried out to dispense beverage cans automatically.

N-EM-MBC: Hot Drinks Machine — EDIBON: An automatic hot drinks machine is represented by "N-EM-MBC"; it emulates the sequence of actions carried out by a hot drink machine to provide the desired hot drink.

N-EM-SLU: Running Lights — EDIBON: A running lights system is represented by "N-EM-SLU"; it emulates the control of a series of lamps used to configure the sequence and direction.

N-EM-CACV: Vehicle Feeding & Loading Control Module — EDIBON: Set in a tequila manufacturing industry, the "N-EM-CACV" models a vehicle feeding control system.

N-EM-CB: Pump Control — EDIBON: The automatic control of four pumps that fill a tank is represented by "N-EM-CB".

N-EM-CL: Rolling Mill Control — EDIBON: An automatic laminate control system is represented by "N-EM-CL"; it produces metallic plates of different thicknesses.

N-EM-CMM: Molding Machine Control — EDIBON: A molding machine control with three different molding machines is represented by "N-EM-CMM".

N-EM-CR: Reactor Control — EDIBON: A reactor control is represented by "N-EM-CR"; it emulates the mixing of a catalyst, an inert gas, and a substance.

N-EM-CTRA: Workcell Application — EDIBON: An automatic working cell that produces pieces by soldering two simple pieces together is represented by "N-EM-CTRA".

N-EM-MA: Embossing Machine — EDIBON: The automatic embossing process of metal disks is represented by "N-EM-MA"; it emulates the series of actions carried out to emboss disks from metallic plate.

N-EM-PAE: Automatic Stamping Press — EDIBON: An automatic stamping press, together with a transport system, is what the "N-EM-PAE" models.

N-EM-PELE: Packing Line and Bottling Plant — EDIBON: An automatic packing line and bottling machine is represented by "N-EM-PELE", where the processes of bottling, sealing, labeling, packing, and palletizing can be emulated.

N-EM-RAC: Compressed Air Network — EDIBON: A compressed air network is represented by "N-EM-RAC"; it is composed of a service unit with an air compressor and an air tank, and a pipe network that supplies an installation with compressed air.

N-EM-SDT: Pipe Bending System — EDIBON: A pipe bending system with a conveyor is represented by "N-EM-SDT".

N-EM-ST: Drilling System — EDIBON: An automatic drilling system is represented by "N-EM-ST"; it emulates the steps used to transport pieces to the drilling zone, emulates a drilling process, and transports the drilled pieces to the output area.

N-EM-TC: Coal Treatment — EDIBON: A coal treatment system used to obtain a desired coal mix from three different coal type storages is represented by "N-EM-TC".

N-EM-AG2Z: Two Zones Parking Garage — EDIBON: A car parking garage with two zones is represented by "N-EM-AG2Z"; it emulates the control of four barriers, two for exiting, one for entering, and another for changing the parking zone.

N-EM-AV: Car Parking — EDIBON: A car parking is represented by "N-EM-AV"; it emulates the common components used in an automated car park, such as the barrier motor, vehicle presence detectors, traffic lights, etc.

N-EM-CST: Traffic Signal Control — EDIBON: An automatic traffic signal control is represented by "N-EM-CST"; it emulates a traffic crossroad.

N-EM-CSV: Ventilation System Control — EDIBON: An automatic ventilation system of an underground car park is represented by "N-EM-CSV"; it controls the smoke level and the CO level to activate the extractor fans.

N-EM-CCP: Count and Position Control — EDIBON: A count and position control that emulates a robot's movement is represented by "N-EM-CCP".

N-EM-CPOS: Position Control — EDIBON: A position control system that emulates the control of a cutting machine with a storage system is represented by "N-EM-CPOS".

N-EM-MCC: Mails Allocation Machine — EDIBON: A mail allocation machine that sorts mail into three different allocations is represented by "N-EM-MCC".

N-EM-SBT: Conveyor Belts System — EDIBON: A conveyor belt system used to transport three different pieces and sort them into three different areas is represented by "N-EM-SBT".

N-EM-SCC: Collecting Belt Conveyor — EDIBON: A collecting belt conveyor system composed of three auxiliary conveyors that transport the products to a main conveyor is represented by "N-EM-SCC".

N-EM-SCCT: Conveyor Charging System — EDIBON: A conveyor charging system with four conveyor belts is represented by "N-EM-SCCT".

N-EM-SL: Cleaning System — EDIBON: An automatic vegetable cleaning system operating in a continuous process with a quality control system is represented by "N-EM-SL".

AE-PLC-AC: Air Pressure and Flow Control Workstation — EDIBON: This is an EDIBON PLC based workstation for the study of air pressure and flow control. The wider application range it belongs to includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-ME, the Electrical Machines Application, and AE-PLC-SM, the Smart Grid System Application, among further PLC applications such as pH control and traffic light control. The set is intended for PLC automation laboratories.

AE-PLC-CN: Flow and Level Control Workstation — EDIBON: This EDIBON workstation is built for teaching flow and level control through PLC automation. It forms part of a wider range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-PH, the pH Control Workstation, and AE-PLC-SE, the Elevator Control Application, along with other applications for energy and industrial process control. It suits PLC automation laboratories.

AE-PLC-CS: Traffic Light Control Application — EDIBON: This EDIBON application teaches traffic light control logic through PLC automation. It sits within a range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-INV, the Greenhouse Application, and AE-PLC-SE, the Elevator Control Application, alongside further applications covering energy, kneading and door control. The set is intended for PLC automation laboratories.

AE-PLC-EE: Wind Energy Application — EDIBON: This is an EDIBON PLC application for teaching wind energy control principles. It belongs to a range that also includes AE-PLC-EF, the Photovoltaic Energy Application, AE-PLC-EST, the Solar Thermal Energy Application, and AE-PLC-SH, the Hybrid Energy Application, together with further applications for industrial process and machine control. It is aimed at PLC automation laboratories.

AE-PLC-EF: Photovoltaic Energy Application — EDIBON: This EDIBON application covers photovoltaic energy control through PLC automation. The range it belongs to includes AE-PLC-EE, the Wind Energy Application, AE-PLC-EST, the Solar Thermal Energy Application, and AE-PLC-SH, the Hybrid Energy Application, along with further workstations for industrial and machine control. The set suits PLC automation laboratories.

AE-PLC-EST: Solar Thermal Energy Application — EDIBON: Built around solar thermal energy control, this EDIBON application uses PLC automation for teaching. It forms part of a range including AE-PLC-EF, the Photovoltaic Energy Application, AE-PLC-EE, the Wind Energy Application, and AE-PLC-SH, the Hybrid Energy Application, plus further applications for process and machine control. It is intended for PLC automation laboratories.

AE-PLC-INV: Greenhouse Application — EDIBON: This EDIBON application teaches greenhouse process control through PLC automation. It sits within a range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-CS, the Traffic Light Control Application, and AE-PLC-SE, the Elevator Control Application, along with further applications for energy and door control. The set is aimed at PLC automation laboratories.

AE-PLC-ME: Electrical Machines Application — EDIBON: Assembled for PLC based teaching, this EDIBON application covers electrical machines control. It belongs to a range including AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-SPA, the Automatic Sectional Door Application, and AE-PLC-SA, the Industrial Kneader Application, together with further applications for energy and process control. It suits PLC automation laboratories.

AE-PLC-MEE: Wind Turbine Application — EDIBON: This EDIBON application addresses wind turbine control through PLC automation. The range it forms part of includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-ME, the Electrical Machines Application, and AE-PLC-EE, the Wind Energy Application, along with further applications for process, energy and machine control. It is intended for PLC automation laboratories.

AE-PLC-PH: pH Control Workstation — EDIBON: This EDIBON workstation is built for teaching pH control through PLC automation. It forms part of a range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-ME, the Electrical Machines Application, and AE-PLC-SPA, the Automatic Sectional Door Application, plus further applications for energy and process control. It is aimed at PLC automation laboratories.

AE-PLC-RT: Temperature Regulation Application — EDIBON: This EDIBON application covers temperature regulation through PLC automation. It sits within a range including AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-PH, the pH Control Workstation, and AE-PLC-SM, the Smart Grid System Application, along with further applications for energy and process control. The set is intended for PLC automation laboratories.

AE-PLC-SA: Industrial Kneader Application — EDIBON: This is an EDIBON application for teaching industrial kneading control through PLC automation. It belongs to a range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-SE, the Elevator Control Application, and AE-PLC-SPA, the Automatic Sectional Door Application, together with further applications for energy control. It suits PLC automation laboratories.

AE-PLC-SH: Hybrid Energy Application — EDIBON: This EDIBON application teaches hybrid energy control through PLC automation. The range it forms part of includes AE-PLC-EF, the Photovoltaic Energy Application, AE-PLC-EE, the Wind Energy Application, and AE-PLC-EST, the Solar Thermal Energy Application, along with further applications for industrial process control. It is aimed at PLC automation laboratories.

AE-PLC-SM: Smart Grid System Application — EDIBON: This EDIBON application addresses smart grid systems through PLC automation. It forms part of a range including AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-ME, the Electrical Machines Application, and AE-PLC-SH, the Hybrid Energy Application, plus further applications for energy and process control. It is intended for PLC automation laboratories.

AE-PLC-SP: Power System Application — EDIBON: This PLC based EDIBON application addresses power system studies. It forms part of a range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-SM, the Smart Grid System Application, and AE-PLC-EE, the Wind Energy Application, together with further applications for process and energy control. It suits PLC automation laboratories.

AE-PLC-SPA: Automatic Sectional Door Application — EDIBON: This EDIBON application covers automatic sectional door control through PLC automation. It belongs to a range that includes AE-PLC-CPI, the Industrial Processes Control Workstation, AE-PLC-SE, the Elevator Control Application, and AE-PLC-SA, the Industrial Kneader Application, along with further applications for energy control. The set is aimed at PLC automation laboratories.

BS10-PLC: Light Test Module for PLC — EDIBON: Through the "BS10-PLC", different light measurement techniques can be studied, along with control of light intensity by means of a PLC.

BS2-PLC: Temperature Test Module for PLC — EDIBON: Through the "BS2-PLC", the use and applications of temperature sensors as a measuring device can be studied, together with how to perform temperature control by means of a PLC.

BS3-PLC: Pressure Test Module for PLC — EDIBON: Pressure measurement techniques and control applications with a PLC can be studied using the "BS3-PLC".

BS4-PLC: Flow Test Module for PLC — EDIBON: Flow measurement techniques and control by means of a PLC can be studied using the "BS4-PLC".

BS5-PLC: Ovens Test Module for PLC — EDIBON: Through the "BS5-PLC", temperature measurement techniques inside a sealed enclosure, such as an oven, can be studied, along with how to perform temperature control through a PLC.

BS6-PLC: Liquid Level Test Module for PLC — EDIBON: Liquid level measurement and control techniques of a tank, by means of a PLC, can be studied using the "BS6-PLC".

BS7-PLC: Tachometers Test Module for PLC — EDIBON: Linear and angular speed measurement techniques through a PLC can be studied using the "BS7-PLC".

BS9-PLC: Pneumatic Test Module for PLC — EDIBON: Control and handling techniques of a pneumatic actuator, by means of a PLC, can be studied using the "BS9-PLC".

AE-PLC-A: Part Feeding Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-A" Feeding Workstation for Pieces was created to study pieces feeders with quality control within computer integrated manufacturing systems.

AE-PLC-MA: Multi-Part Feeding Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-MA" is a Multiple Pieces Feeder Workstation. It provides three different types of pieces to be assembled into one piece by the industrial robot of the "AE-BR" unit.

AE-PLC-CPD: Defective Pieces Sorter Workstation Application — EDIBON: Commanded by a PLC, the "AE-PLC-CPD" is a Defective Pieces Sorter Workstation Application that measures the deepness of the hole in the pieces.

AE-PLC-SIP: Parts Identification Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-SIP" is a quality control workstation that checks three characteristics of the input pieces.

AE-PLC-SLB: Ball Selection Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-SLB" Ball Selection Workstation supports the study of ball sorting mechanisms using PLC, pneumatic components, and industrial sensors. Positioning, storage, and sorting processes become easier to understand as a result.

AE-PLC-CTCA: AC Conveyor Belt Workstation — EDIBON: The "AE-PLC-CTCA" operates as an AC powered conveyor system, commanded by a PLC.

AE-PLC-CTCC: DC Conveyor Belt Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-CTCC" DC Conveyor Belt Workstation serves to study how to manage a DC conveyor system.

AE-PLC-MACT: Pneumatic Handling and Conveyor Belt Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-MACT" Pneumatic Handling and Conveyor Belt Workstation lets students become familiar with automatic systems with conveyor systems, including PLC, industrial sensors, and pneumatic actuators.

AE-PLC-MAE: Electrical Handling Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-MAE" is an electrical handling system.

AE-PLC-SPO: Positioning Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-SPO" Positioning Workstation was created to study three-axis positioners for computer integrated manufacturing systems. Incoming pieces are sorted by material and dimensions using a PLC-controlled manipulator.

AE-PLC-APB: Bottle Opening Workstation — EDIBON: The "AE-PLC-APB" operates as a bottle opening system, commanded by a PLC.

AE-PLC-AT: Automatic Screwdriving Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-AT" is an automatic screw workstation that supplies and mounts four screws in a piece.

AE-PLC-CRS: Corking Workstation — EDIBON: The "AE-PLC-CRS" operates as a corking system, commanded by a PLC.

AE-PLC-FS: Filling Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-FS" is a filling system.

AE-PLC-FT: Filtering Workstation — EDIBON: The "AE-PLC-FT" operates as a filtration system, commanded by a PLC.

AE-PLC-M: Mounting Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-M" is a mounting workstation that provides pieces to the system and mounts them inside the base pieces.

AE-PLC-MEMB: Bottling Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-MEMB" Bottling Station supports hands-on study of an automated bottling process with five stages: container feeding, filling, cap feeding, capping, and final extraction. Pneumatic technology, industrial-grade sensors, and PLC-based control are featured, and the station is fully compatible with flexible manufacturing systems.

AE-PLC-MET: Labelling Workstation — EDIBON: The "AE-PLC-MET" operates as an automatic labelling machine, commanded by a PLC.

AE-PLC-MS: Mixing Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-MS" is a mixing system.

AE-PLC-P: Automatic Pressing Workstation — EDIBON: A set of practical exercises makes up the "AE-PLC-P" workstation, through which the student will understand how to control an automatic pressing system with a pneumatic handling system.

AE-PLC-PHD: Punching Workstation — EDIBON: The "AE-PLC-PHD" operates as a processing workstation, commanded by a PLC.

AE-PLC-SCOR: Cutting Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-SCOR" Cutting Workstation is intended for the study of automatic cutting machines within computer integrated manufacturing systems.

AE-PLC-SMOLD: Molding Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-SMOLD" is an automatic molding workstation.

AE-PLC-ST: Drilling Workstation — EDIBON: Commanded by a PLC, the "AE-PLC-ST" is a workstation that performs automatic drilling.

AE-PLC-MR2: Rotary Table Workstation: Feeding, Quality Control, and Assembly (material and color study) — EDIBON: Designed by EDIBON, the "AE-PLC-MR2" Rotary Table Workstation: Feeding, Quality Control, and Assembly (material and color study) was developed to study the mounting, quality control, and feeding system integrated in a rotatory table.

AE-PLC-MR3: Rotary Table Workstation: Automated Processing Control (drilling and polishing study) — EDIBON: Designed by EDIBON, the "AE-PLC-MR3" Rotary Table Workstation: Automated Processing Control (drilling and polishing study) was created to study automatic processing control integrated in a rotary table.

AE-PLC-MR4: Rotary Table Workstation: Filling, Bottling and Capping — EDIBON: Designed by EDIBON, the "AE-PLC-MR4" Rotary Table Workstation: Filling, Bottling and Capping serves to study how an automatic filling, bottling, and capping system works.

AE-PLC-ALB: Bottling Storage Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-ALB" Bottling Storage Workstation was created to study how an automatic storage system with three degrees of freedom (XYZ) and a vacuum manipulator works.

AE-PLC-ALT: Temporary Storage Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-ALT" Temporary Storage Workstation was developed to study how an automatic temporary storage workstation operates.

AE-PLC-ALV: Vertical Storage Workstation — EDIBON: Designed by EDIBON, the "AE-PLC-ALV" Vertical Storage Workstation allows the study of control of a vertical positioning, storage, and sorting system.