Digital Electronics Lab in Bangladesh

EDIBON teaching and research units for the digital electronics laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included. 8 units available.

8 products from 1 manufacturer: EDIBON.

Products

• N-M12: Basic Combinational Circuits Module — EDIBON: Covers combinational logic, where the outputs depend only on the inputs present at that instant, through encoders, decoders and the other standard blocks. Faults can be simulated in most circuits so students reason about what has changed in the logic.
• N-M11: Digital Electronics Fundamentals Module — EDIBON: Introduces digital systems, in which the devices behave as switches and signals take values from a discrete set. Covers logic gates, Boolean functions and the basic building blocks of digital circuits, with fault simulation available for diagnostic practice.
• N-M10: Digital Systems & Converters Module — EDIBON: Covers digital systems together with conversion between the analogue and digital domains, including the coding schemes used and the operation of the converter circuits. Faults can be simulated in most circuits so students investigate why a conversion is incorrect.
• N-M13: Basic Sequential Circuits Module — EDIBON: Covers sequential logic, where the output depends on the value previously present at the output as well as on the inputs, so the circuits hold memory. Students study the standard sequential blocks, with fault simulation available in most circuits.
• N-M60: Analog/Digital Converters Module — EDIBON: Deals with turning a continuously varying analogue signal into digital form for processing, covering sampling, quantisation and the converter circuits themselves. Faults can be simulated in most of the circuits under study for diagnostic exercises.
• TDS: Computer Controlled Teaching Unit for the Study of Digital Signal Processing — EDIBON: A computer controlled unit for digital signal processing, covering continuous waveform generation, signal digitisation, fast Fourier transform display and simultaneous work with two external signals. Students analyse the nature of signals and the effect of sampling.
• CADDA: Computer Controlled A/D and D/A Converters Unit — EDIBON: A computer controlled unit for learning the usual procedures of analogue to digital and digital to analogue conversion, together with the related circuits such as adders and comparators. Signals are captured on several simultaneous channels and shown by the software.
• N-M61: Digital/Analog Converters Module — EDIBON: Covers recovering an analogue signal from digital data, the step needed whenever a sampled quantity such as a temperature reading must be returned to a continuous form. Students study the conversion circuits and can introduce faults for diagnosis.

All Scientific & Laboratory Equipment categories