Sterilisation & Suction in Bangladesh

Steam sterilisers and electric suction units for CSSD, theatre and procedure rooms.

18 products from 2 manufacturers: Saikang Medical, GEMMY Industrial.

Products

• SDL-D0313 Horizontal Cylindrical Pressure Steam Sterilizer — Saikang Medical: Horizontal cylindrical pressure steam steriliser with a stainless steel chamber, steam jacket and piping system. The outer shell is carbon steel with a sprayed plastic coating that gives a smooth, easy to clean surface.
• SDL-D0450 Tabletop Sterilizer — Saikang Medical: Tabletop steam steriliser with a removable stainless steel tray rack holding three aluminium alloy disinfection trays. It has a large capacity tank for distilled water, a powder coated carbon steel housing and a nylon carrying handle.
• SK-EX122 Suction Device — Saikang Medical: Electric suction unit with a 30 L/min flow rate and 680 mmHg vacuum pressure, driven by an oil free pump. It has two 2500 ml collection bottles and foot switch control.
• SK-EX123 Suction Device — Saikang Medical: Electric suction unit with a 20 L/min flow rate and 680 mmHg vacuum pressure, driven by an oil free pump. It has two 2500 ml glass collection bottles and foot switch control.
• SK-EX121 Suction Device — Saikang Medical: A high-quality cold-rolled steel plate shell, electrostatically sprayed on both internal and external surfaces, gives this suction unit the durability and easy cleaning that daily hospital work demands. It is intended for wards, clinics, treatment rooms and emergency care areas. The vacuum gauge lets clinical staff read negative pressure clearly while suction is in progress.
• SK-EX124 Suction Device — Saikang Medical: Here the shell is ABS injection moulded, giving a clean appearance, a stable structure and a surface that wipes down quickly. Saikang lists it for hospitals, treatment rooms, wards, emergency areas and general clinical care. A fixed handle is built in so staff can lift and reposition the device without fuss.
• SU-990 portable suction unit — GEMMY Industrial: A battery backed portable aspirator for emergency use, measuring 200 x 350 x 205 mm with an oil-less piston vacuum pump giving 13 to 15 litres per minute over a 0 to 600 mmHg range. A sealed lead acid 12 V rechargeable battery with automatic charging gives 1 to 1.5 hours from a full charge, with GEMMY offering an optional battery rated for 3 to 3.5 hours, and the charger works from the mains at the same time as the unit is in use. A plug-in cable allows operation from any 12 V DC supply, in an ambulance or a vehicle, which suits areas where mains failure, unstable current or blackouts are common. A three step switch selects suction, off and charge, and the 1000 ml collection bottle has overflow prevention.
• SU-991 portable suction unit — GEMMY Industrial: The mains only version of GEMMY's 200 x 350 x 205 mm portable aspirator, with an oil-less piston vacuum pump that needs no lubrication or maintenance, giving 13 to 15 litres per minute across a 0 to 600 mmHg range. A 1000 ml collection jar graduated in millilitres, in autoclavable plastic or glass, carries a fluid overflow preventive stopper. A built-in vacuum gauge reads 0 to 760 mmHg, or 0 to 30 inHg, for direct reading. GEMMY states the models are CE certified to the electromagnetic compatibility requirements of EN60601-1-2.
• SU-770 portable suction unit — GEMMY Industrial: A low profile portable aspirator measuring 320 x 145 x 240 mm, driven by an oil-less piston vacuum pump that requires no lubrication and no maintenance. Airflow is 13 to 15 litres per minute over a vacuum range of 0 to 600 mmHg, drawn into a single 1000 ml collection jar with an overflow preventive stopper, available in autoclavable plastic or glass. The built-in vacuum gauge reads 0 to 760 mmHg, or 0 to 30 inHg. GEMMY states the models are CE certified to the electromagnetic compatibility requirements of EN60601-1-2.
• SU-305P mobile suction unit — GEMMY Industrial: A trolley mounted theatre aspirator measuring 500 x 420 x 885 mm, whose body is moulded in one piece from compact fibreglass for resistance to rust, chipping and corrosion. It takes either an oil rotary pump at 191 W giving 80 litres per minute and 700 mmHg, or a two cylinder oil-less pump at 270 W giving 70 litres per minute and 680 mmHg. Two plastic collection bottles with overflow preventive fittings and autoclavable rubber bungs are changed over by a left to right control knob, and a built-in gauge reads 0 to 760 mmHg. Four anti-static rubber castors, two of them lockable, carry the unit, and it is supplied with two bottles, a footswitch and a length of autoclavable silicone suction tubing.
• SU-510-1 mobile suction unit — GEMMY Industrial: A mobile theatre aspirator measuring 455 x 300 x 710 mm, offered with either an oil rotary pump at 191 W giving 80 litres per minute and 710 mmHg, or a single cylinder oil-less pump at 200 W giving 28 to 33 litres per minute and 680 mmHg. Two 1000 ml polycarbonate collection jars with overflow prevention are switched by a left to right control knob, and a built-in gauge reads 0 to 760 mmHg. GEMMY lists it for suction biopsy, surgery, endometrial curettage and obstetric and gynaecological work, mounted on four anti-static rubber castors of which two lock. It is supplied with two bottles, a footswitch and autoclavable, reusable silicone suction tubing.
• SU-305 mobile suction unit — GEMMY Industrial: The largest trolley aspirator in the range at 640 x 395 x 825 mm, carrying two 3000 ml collection jars in glass or plastic with overflow prevention, and a storage cabinet on the back for accessories and tools. It takes either an oil rotary pump at 191 W giving 80 litres per minute and 700 mmHg, or a two cylinder oil-less pump at 270 W giving 70 litres per minute and 680 mmHg. Vacuum is regulated from zero to maximum and read on a built-in gauge covering 0 to 760 mmHg, with a left to right knob switching which bottle draws. Four anti-static rubber castors with two locks carry the unit, and GEMMY notes low noise operation suited to wards and theatres.
• SA-232 portable autoclave — GEMMY Industrial: A portable steam steriliser with a 230 mm diameter by 410 mm deep chamber in 304 stainless steel, giving roughly 16 litres in an overall footprint of 335 x 430 x 600 mm. Design temperature is 140 degrees C, with sterilising pressure of 1.4 kg/cm2 at approximately 122 degrees C, and the published cycle table quotes 122 degrees C at 1.12 kg/cm2 for unwrapped, wrapped and liquid loads. Several internal programmes are preset for selection, and GEMMY lists the machine for dental clinics, hospitals and laboratories handling wrapped, unwrapped, liquid and utensil loads. Safety devices are an overheat and low water cut-off switch, a safety valve and a release valve.
• SA-232X bench top autoclave — GEMMY Industrial: A bench top steam steriliser with a 230 mm diameter by 390 mm deep chamber in 304 stainless steel, approximately 16 litres, in an overall cabinet of 501 x 406 x 537 mm. Design temperature is 140 degrees C and the published working range for unwrapped, wrapped and liquid loads is 115 to 134 degrees C at 0.9 to 2.1 kg/cm2. GEMMY states the autoclave is manufactured in conformity with directive 93/42/EEC. Safety fittings are a safety valve, an emergency exhaust valve, a release valve, a door safety holder and a pressure control switch.
• SA-300MA bench top autoclave — GEMMY Industrial: A Class B table top steriliser with a 40 litre chamber measuring 300 mm diameter by 570 mm deep, running at 121 or 135 degrees C with an automatic fill water system and a vacuum assisted drying stage selectable at 0, 15, 30, 35 or 40 minutes. Programmes cover wrapped and unwrapped loads, dry and undried, liquids, a PRION programme, Bowie-Dick and a pump test, with temperature shown digitally, pressure on a pressure and vacuum gauge and programme status on LED. It draws 3000 W at 14 A, split between a 2300 W heater, a 600 W dry heater and a 100 W vacuum pump, from a 230 V 50/60 Hz supply. Safety cover includes a 2.5 kg/cm2 pressure safety valve, independent over temperature protection, two 30 A no fuse breakers, an over pressure switch, a door lock micro-switch, water level sensors in both the tank and the chamber, and a silicone bellows pressure door lock.
• HL-350 vertical steam autoclave — GEMMY Industrial: A vertical steam steriliser whose cycle runs automatically through conditioning and sterilising phases, with sterilising temperature adjustable from 121 to 132 degrees C and sterilising time from 0 to 60 minutes. The timer only starts once the preset temperature has been reached, and a buzzer announces completion and cuts the heating supply. The cylindrical chamber is SUS 316 stainless steel with a polished surface, thermally insulated with fibreglass and clad in stainless sheet, fitted with a steam trap to discharge condensate and a HEPA air filter to keep contaminated air out. The door is operated manually by a rotating handle with a foot pedal to lift it, sealed by a silicone rubber gasket, and safety cover includes a door interlock, a safety valve, over temperature cut-off, circuit breaker and fuse protection, and a manual emergency exhaust for power outages.
• HL-341 vertical steam autoclave — GEMMY Industrial: A 72 litre vertical steam steriliser with a 350 x 750 mm chamber, working from 120 to 134 degrees C under pressure control, with a gross weight of 140 kg. A semi-automatic control system uses a sterilising and drying switch to select which function runs, and both sterilising and drying times are adjustable from 0 to 60 minutes on the timer. The timer starts only after the preset temperature is reached, illuminated pilot lamps show status, and a buzzer announces completion and cuts the heating supply. An automatic air venting device discharges cool air from the chamber to obtain effective saturated steam, and the machine comes with a sterilisation basket, two tube indicators, a shelf and a hose.
• TC-612 high pressure horizontal steam steriliser — GEMMY Industrial: The large horizontal steriliser in GEMMY's range, with a 60 cm diameter by 120 cm chamber giving approximately 339 litres, working between 121 and 132 degrees C. It draws 18 kW from a three phase 220 V or 380 V, 50/60 Hz supply. GEMMY lists it for sterilising wrapped and unwrapped loads, liquids and surgical instruments in hospitals, laboratories and clinics.

All Medical Equipment categories