Basic Electronics Lab in Bangladesh

EDIBON teaching and research units for the basic electronics laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included. 44 units available.

44 products from 1 manufacturer: EDIBON.

Products

• N-M1: Direct Current (DC) Circuits Module — EDIBON: A bench module for the fundamentals of direct current, covering Ohm's law, resistor characteristics, series and parallel association, the Wheatstone bridge and Kirchhoff's laws. Faults can be introduced into most circuits so students diagnose why the circuit stops working properly.
• N-M18: Three-phase Circuits Module — EDIBON: Covers how three-phase systems are generated and measured, including star and delta connection, balanced and unbalanced loads, line and phase quantities, and three-phase rectification. Fault simulation on the circuit blocks lets students trace and explain abnormal behaviour.
• N-M16: Electric Networks Module — EDIBON: Covers network analysis on a single panel: Ohm's law, Thevenin and Norton equivalents, the superposition theorem, Wheatstone bridge operation and star to delta transformation. Faults can be switched into most circuits so students investigate what has changed and why.
• N-M17: Electromagnetism Module — EDIBON: Demonstrates electromagnetic devices at bench scale, including the transformer, solenoid, relay, stepper motor and DC motor. Students measure the electrical quantities involved, and fault simulation on the circuit blocks supports diagnostic exercises alongside the measurements.
• N-M4: Semiconductors II Module — EDIBON: Extends transistor study to circuits combining two or more devices, showing how multi-transistor structures improve on the characteristics of a single transistor, for example raising input impedance without losing gain. Faults can be introduced for diagnostic practice.
• LIEBA: Basic Electronics and Electricity Laboratory — EDIBON: A modular laboratory for basic electronics, basic electricity and circuit theory, built from a power supply, a base unit and self-contained study modules. Any configuration can be chosen by area of study and number of working posts, and the system can be enlarged later.
• N-M2: Alternating Current (AC) Circuits Module — EDIBON: Introduces alternating current: waveform characteristics, peak and RMS relationships, phase, and the behaviour of resistive, inductive and capacitive circuits including resonance. Faults can be simulated in most circuits so students work out why a circuit misbehaves.
• N-M3: Semiconductors I Module — EDIBON: Covers the basic concepts of diodes as extrinsic semiconductors, with practical measurement of their characteristics and the rectifying circuits built from them. Faults can be simulated in most circuits so the student must find the damaged component or the wrong connection.
• N-M14: Optoelectronics Module — EDIBON: Deals with components whose operation depends on light, both emitters inside and outside the visible spectrum and light sensitive devices. Students measure their characteristics and build typical optoelectronic circuits, with fault simulation available for diagnosis.
• N-M5: Power Supplies Module — EDIBON: Covers rectification from AC to DC and the operation of fixed, symmetrical and switched mode power supplies, including symmetrical voltage regulators. Faults can be simulated in most of the circuits under study so students trace the cause of incorrect operation.
• N-M6: Oscillators Module — EDIBON: Shows how an oscillator produces a periodic output from a DC supply through an oscillating circuit, an amplifier and a positive feedback network. Students build and measure the main oscillator types, and faults can be introduced for diagnostic exercises.
• N-M8: Filters Module — EDIBON: Covers electronic filters as two port networks that pass or suppress signals by frequency while altering amplitude and phase. Students measure the frequency response and build the main filter types. Faults can be simulated in most circuits for diagnostic work.
• N-M7: Operational Amplifiers Module — EDIBON: Covers the operational amplifier as a high gain differential device and the circuits built around it. Students measure gain and the transfer function of the usual configurations. Faults can be simulated in most of the circuits so the cause can be investigated.
• M99: Analog Circuits Unit — EDIBON: A bench unit for analogue electronics practicals covering an analogue multiplexer, an analogue multiplier, a function generator, and AM modulation and demodulation. A digital control signal selects between the two analogue inputs of the multiplexer stage.
• AV-A: Automotive Actuators Unit — EDIBON: Designed by EDIBON, the Automotive Actuators Unit, "AV-A", is used to study the electronic components and actuators used in the automotive field.
• AV-AC: Automotive Auxiliary Components Unit — EDIBON: Designed by EDIBON, the Automotive Auxiliary Components Unit, "AV-AC", helps students understand how real automotive sensors and actuators operate, as well as how an electronic control unit works.
• AV-EC: Automotive Fundamental Electronic Circuits Unit — EDIBON: Designed by EDIBON, the Automotive Fundamental Electronic Circuits Unit, "AV-EC", brings together the main electronic circuits used in modern cars today. It serves as a solid introduction to automotive electronic systems.
• AV-ECC: Automotive Engine Cooling Circuit Unit — EDIBON: Designed by EDIBON, the Automotive Engine Cooling Circuit Unit, "AV-ECC", teaches the electronic components, sensors and actuators related to engine cooling systems used in the automotive field.
• AV-ECD: Automotive Electronic Control Device Unit — EDIBON: Designed by EDIBON, the Automotive Electronic Control Device Unit, "AV-ECD", allows an ECU (electronic control unit) to be flashed with different programs and lets the response of the ECU to different input signals be changed, among other functions.
• AV-ELC: Automotive Fundamental Electrical Circuits Unit — EDIBON: Designed by EDIBON, the Automotive Fundamental Electrical Circuits Unit, "AV-ELC", is used to study the main electrical circuits found in modern cars, giving a clear and hands-on introduction to contemporary automotive electronics.
• AV-GE: Automotive Electric Generation Unit — EDIBON: Designed by EDIBON, the Automotive Electric Generation Unit, "AV-GE", offers a practical way to become familiar with the components used in today's automobile electrical circuits.
• AV-HYB: Computer Controlled Automotive Hybrid Simulation Unit — EDIBON: Designed by EDIBON, the Computer Controlled Automotive Hybrid Simulation Unit, "AV-HYB", is used to study and analyse how the hybrid vehicle operates through the different ways its energy sources can be combined.
• AV-S: Automotive Sensors Unit — EDIBON: Designed by EDIBON, the Automotive Sensors Unit, "AV-S", is used to study the electronic components and sensors used in the automotive field.
• AV-SCS: Automotive Starting and Charging Systems Unit — EDIBON: Designed by EDIBON, the Automotive Starting and Charging Systems Unit, "AV-SCS", provides theoretical and practical training in the electrical ignition and charging systems of vehicles.
• AV-WW: Automotive Wiper Washer Unit — EDIBON: Designed by EDIBON, the Automotive Wiper Washer Unit, "AV-WW", is used to study the electronic components, sensors and actuators related to wiper washer systems used in the automotive field.
• M-KITS: Basic Electronics and Electricity Assembly Kits: — EDIBON: Electronics and Electricity Assembly Kits (M-KITS) are intended to equip students with the elements needed to build their own circuits.
• M1/KIT: Direct Current (DC) Circuits Kit — EDIBON: Designed by EDIBON, the Direct Current (DC) Circuits Kit, "M1/KIT", offers a starting point for studying the basic principles of direct current.
• M10/KIT: Digital Systems and Converters Kit — EDIBON: The behaviour of BCD/Binary counters, comparators and analogue integrators can be studied with the Digital Systems and Converters Kit, "M10/KIT", designed by EDIBON. Analogue/digital conversion and viceversa are also covered.
• M11/KIT: Digital Electronic Fundamentals Kit — EDIBON: Numbering systems, logic circuits, TTL gates, CMOS, Boolean algebra, etc. can all be studied using the Digital Electronic Fundamentals Kit, "M11/KIT", designed by EDIBON.
• M12/KIT: Basic Combinational Circuits Kit — EDIBON: Designed by EDIBON, the Basic Combinational Circuits Kit, "M12/KIT", enables the study of encoders, decoders, multiplexers, demultiplexers, digital comparators and arithmetic and logical operations.
• M13/KIT: Basic Sequential Circuits Kit — EDIBON: All types of bistables, counters, flip-flops, synchronous sequential circuits and the operation of memories can be studied with the Basic Sequential Circuits Kit, "M13/KIT", designed by EDIBON.
• M14/KIT: Optoelectronics Kit — EDIBON: Designed by EDIBON, the Optoelectronics Kit, "M14/KIT", allows the study of the main light emitters and liquid crystal displays (LCD), photoconductive cells, fibre optics, infrared, etc.
• M16/KIT: Electric Networks Kit — EDIBON: Designed by EDIBON, the Electric Networks Kit, "M16/KIT", makes it possible to understand the principles of Ohm's Law, Norton's and Thévenin's Theorem, Wheatstone bridge operation, superposition theorems or star/delta transformation and viceversa.
• M18/KIT: Three-phase Circuits Kit — EDIBON: The generation of three-phase systems, load balancing between phases and the operation of three-phase rectifiers, etc., can be studied using the Three-phase Circuits Kit, "M18/KIT", designed by EDIBON.
• M2/KIT: Alternating Current (AC) Circuits Kit — EDIBON: Designed by EDIBON, the Alternating Current (AC) Circuits Kit, "M2/KIT", provides a starting point for the study of the basic principles in alternating current.
• M3/KIT: Semiconductors I Kit — EDIBON: Designed by EDIBON, the Semiconductors I Kit, "M3/KIT", allows the basic concepts of diodes to be studied. At the same time, the student carries out a series of assemblies on the practice board, consolidating knowledge of PN-type junctions, uses of the diode as a rectifier, Zéner diodes, etc.
• M4/KIT: Semiconductors II Kit — EDIBON: Designed by EDIBON, the Semiconductors II Kit, "M4/KIT", extends the knowledge acquired in the basic module "M3/KIT" to allow further study of semiconductors.
• M5/KIT: Power Supplies Kit — EDIBON: Designed by EDIBON, the Power Supplies Kit "M5/KIT" allows the study of symmetrical voltage regulators and the operation of fixed, symmetrical and switched-mode power supplies, as well as rectification (conversion of an AC voltage to a DC voltage).
• M6/KIT: Oscillators Kit — EDIBON: Designed by EDIBON, the Oscillators Kit, "M6/KIT", allows the study of different oscillators: RC and LC network oscillators, Wein bridge, Colpitts, Hartley and the astable multivibrator.
• M7/KIT: Operational Amplifiers Kit — EDIBON: Designed by EDIBON, the Operational Amplifiers Kit, "M7/KIT", allows the study of different amplifiers: inverting, non-inverting, additive, differential and comparators.
• M8/KIT: Filters Kit — EDIBON: Designed by EDIBON, the Filters Kit, "M8/KIT", allows the study of the different types of filters: RC and LC, in "T" type configuration, and active filters. Associations of these can also be studied to practice with more complex filters and obtain other filters with certain desired characteristics (low-pass filter, high-pass, band-pass and eliminated band).
• M9/KIT: Power Electronics Kit — EDIBON: Designed by EDIBON, the Power Electronics Kit, "M9/KIT", allows the study of the operation of MOSFET transistors, thyristors, TRIACs, etc.
• N-M15: Own Development Module — EDIBON: Designed by EDIBON, the Own Development Module "N-M15" consists of a circuit board. The board allows a set of assemblies to be carried out on it, supporting the study of the basic concepts of direct current circuits.
• M99-6: Electronics for Motors and Generators Unit — EDIBON: Designed by EDIBON, the Electronics for Motors and Generators Unit, "M99-6", lets the student learn the most important concepts related to motors and generators, along with the differences between them.

All Scientific & Laboratory Equipment categories