Instrumentation & Measurement Lab in Bangladesh

EDIBON teaching and research units for the instrumentation & measurement laboratory, supplied, installed and commissioned in Bangladesh by Vvon with faculty training included. 20 units available.

20 products from 1 manufacturer: EDIBON.

Products

• SAIT: Transducers and Instrumentation Unit — EDIBON: Shows the transducers most used in industry on one panel. The lower part carries the input and output transducers, covering resistance, temperature, light, position, force, environmental, speed and sound devices, and the upper part holds the signal conditioning.
• BS: Modular System for the Study of Sensors — EDIBON: A modular sensor laboratory made up of a base unit and interchangeable test modules. The base unit conditions and evaluates the transducer signals while each module presents a different physical variable to be measured and controlled.
• BS1: Vibrations and/or Deformations Test Module — EDIBON: Teaches measurement of mechanical vibration and displacement. An elastic vibrating beam on the upper face of the module carries the sensors, so students excite the beam and record how each transducer responds to the movement.
• BSPC: Computer Controlled Base Unit for BS — EDIBON: The computer controlled base unit for the BS sensor modules. It provides the differential and instrumentation amplifier stages needed to condition transducer outputs before a data acquisition system can capture the signal accurately.
• BS2: Temperature Test Module — EDIBON: Teaches the use and control of temperature sensors. A half open chamber is heated by two lamps and the sensors inside record the resulting temperature, so students compare transducer types and set up closed loop temperature control.
• BS4: Flow Test Module — EDIBON: Teaches techniques for measuring changing fluid flow. Two tanks are mounted on a frame with a pumping system that circulates water from the reserve tank, and a measurement transducer records the rate as it varies.
• BS6: Liquid level Test Module — EDIBON: Teaches the use and applications of level sensors and their measurement systems. A two tank arrangement is pumped between reservoirs so students measure liquid level with different transducers and then control it.
• BS3: Pressure Test Module — EDIBON: Teaches the use and applications of pressure sensors and shows the different pressure measurement techniques. A pressure chamber on the module carries several sensors so their outputs can be compared as pressure is varied.
• BS7: Tachometer Test Module — EDIBON: Teaches linear and angular speed measurement. A miniature motor drives a shaft whose speed is set by the voltage applied to the actuator, and the speed sensors on the module are compared as that voltage is varied.
• EDAS/VIS-1.25: EDIBON Data Acquisition and Virtual Instrumentation System (1,250,000 samples/s) — EDIBON: A data acquisition and virtual instrumentation system for EDIBON electronics and communications units that have no supervision or acquisition of their own. It captures, conditions and displays the signals of the unit on a computer.
• EDAS/VIS-WF: EDIBON Data Acquisition System / Virtual Instrumentation System with WI-FI communication — EDIBON: A data acquisition and virtual instrumentation system communicating over Wi-Fi. It performs acquisition, conditioning, processing and display of the signals connected to the unit, removing the wired link to the computer.
• M44: Applications of Light — EDIBON: A unit for practicals on light intensity measurement using photodiodes, which generate a current or voltage when the semiconductor junction is illuminated. Students measure the response of the sensors and build the measuring circuits.
• BS10: Light Test Module — EDIBON: Teaches some of the techniques used to measure light or illumination intensity. The module carries a lamp whose intensity is set by varying the supply voltage, so the light sensors are compared against an adjustable source.
• M41: Resistance Transducers — EDIBON: A unit for practicals on resistance transducers, carrying five types: PTC, NTC, LDR, strain gauge and RTD. Students measure how the resistance of each device changes with the quantity it senses and then condition the signal.
• M45: Linear Position and Force — EDIBON: Covers the use and applications of linear variable displacement transducers, which give an output voltage related to the quantity being measured, such as displacement or force. Students calibrate the transducer and condition its output.
• N-M49: Applications of Temperature and Pressure Module — EDIBON: Covers transducers that convert temperature and pressure into an electrical output. Students measure the characteristic of each device, condition the resulting signal and build the measuring circuits around it.
• M47: Rotational Speed & Position Control — EDIBON: A unit whose DC motor speed is set by the supply voltage, with an optical slot sensor, inductive sensor, infrared reflective sensor, Hall effect sensor and encoder arranged along the shaft. Students compare the sensors and close a speed or position loop.
• FACO: Power Supply — EDIBON: The standard laboratory power supply used with EDIBON electronics and communications modules. It provides fixed and variable DC rails plus an AC output through 2 mm terminals or a 25 pin Sub-D connector, with LED voltage indicators.
• EBC100: Base Unit, with built-in power supply — EDIBON: A self contained base unit that holds EDIBON teaching modules and supplies them with power. It includes the hardware support, the built in power supply and the connections needed to seat and energise the available modules.
• EDAS/VIS-0.25: EDIBON Data Acquisition and Virtual Instrumentation System (speed: 250,000 samples/s) — EDIBON: An acquisition and control system for EDIBON electronics and communications units that have no supervision of their own. It captures, stores and displays signals at up to 250,000 samples per second, with basic, medium and advanced levels of practical exercise.

All Scientific & Laboratory Equipment categories