Brand: Retsch | Category: Scientific & Laboratory Equipment
Rotor mill that grinds soft, medium hard, brittle and fibrous material to below 40 µm by impact and shearing between a rotor and a fixed ring sieve. Speed is freely selectable up to 23,000 rpm and the ring sieve sets the final fineness, so one mill covers a wide fineness range. Temperature monitoring protects heat sensitive samples.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Retsch equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
Rotor beater mill for coarse and fine size reduction of soft to medium hard material, working by impact against a fixed beater arrangement. Speed is adjustable in 500 rpm steps so grinding can be tuned to the sample, and a ring sieve defines the final fineness down to below 50 µm.
The largest jaw crusher in the Retsch range, taking the biggest feed pieces and delivering the highest throughput at 3500 kg per hour. Gap width is set with spacer plates from 6 mm to 60 mm. It is used where sample volumes are at pilot plant rather than laboratory scale.
Cross beater mill for coarse and fine size reduction of medium hard and brittle material such as coal, coke, minerals and slag. It runs from laboratory to pilot plant scale and the adjustable rotor speed with an exchangeable bottom sieve sets the final fineness down to below 100 µm.