Brand: GEMMY Industrial | Category: Medical Equipment
An eight place pipette shaker measuring 175 x 160 x 115 mm. GEMMY lists no timer on this model and quotes CE, ISO and GMP against it.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
A forced convection hot air oven and dry heat steriliser offered in eight capacities from 16 to 200 litres, working from ambient plus 5 degrees C to 250 degrees C under microprocessor PID control. GEMMY quotes temperature uniformity of +/-3.0 degrees C and stability of +/-0.5 degrees C, both measured at 180 degrees C, with the timer only starting once the actual temperature reaches 2 degrees C below the set point. Double wall construction with heavy gauge glass fibre insulation retains heat, and adjustable fresh air inlet ports at top and bottom control the amount of convective air. Safety cover includes an over temperature alarm and cut-out at 10 degrees C above the set point and an independent safety switch that removes power at 220 degrees C if the primary control fails.
A six place pipette shaker measuring 140 x 170 x 155 mm, fitted with a timer. GEMMY lists CE, ISO and GMP against the model.
The gravity convection oven in GEMMY's range, offered where cost is the deciding factor and where accurate temperature control and uniformity are not critical, or where samples must not be disturbed by air movement. Temperature is read directly from a mercury thermometer mounted on the top of the cabinet, and control is by hydraulic thermostat sensor. The door lock is a newer design intended to be easier to open and close, and the formed door gasket limits heat loss. GEMMY publishes no numerical specification table for this model.