Brand: GEMMY Industrial | Category: Medical Equipment
The digital member of the PLC-012 pair, specified with an LED digital tachometer, a 99 minute digital timer and microprocessor speed control, where the base PLC-012 uses an analogue tachometer and a mechanical timer. GEMMY quotes 0 to 12000 rpm across the PLC-012 series depending on which rotor is fitted, driven by an 80 W brush motor inside a moulded stainless steel chamber. Rotors are changed quickly using the attached hexagon wrench, and a safety locking latch with an interlock switch cuts the motor if the lid is opened mid spin. The cabinet measures 310 x 360 x 310 mm and the drive brakes to a gentle stop in 20 seconds.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
A brushless universal centrifuge adjustable from 1000 to 12000 rpm on a three digit LED readout, with microprocessor speed control and a two digit 99 minute timer. Universal multi-voltage operation from 100 V to 240 V removes the need for a transformer, and the stainless steel chamber carries automatic imbalance detection, an overheating sensor on motor and driver, an interlocking lid with manual override for power failures and an emergency stop. Five rotors are published for the machine, from an eight place 15 ml angle rotor to the F-2415 capillary rotor for haematocrit work at a fixed 12000 rpm and 14490 x g. A transparent viewfinder in the lid allows the rotor to be watched while it spins.
An eight place table top centrifuge fitted with the A-0815 rotor for 15 ml or 10 ml test tubes, running to a maximum of 4500 rpm. Control is by mechanical 60 minute timer with an LED lamp as the power indicator. The cabinet measures 270 x 270 x 250 mm, the same footprint as the rest of the PLC bench range. GEMMY lists CE, ISO, GMP and FDA against the model.
A brushless universal centrifuge adjustable from 1000 to 5000 rpm, running on a universal 100 V to 240 V, 50/60 Hz supply with microprocessor speed control and a two digit 99 minute LED timer. The stainless steel chamber is protected by imbalance detection with alarm and brake, an overheat alarm, a safety interlocking lid with an override for power failure, an emergency stop and a shutout device that acts when the lid is opened. GEMMY publishes eight rotors for the machine, ranging from the A-2420 at 15000 rpm and 20630 x g down to the H-0450 for four 50 ml tubes, including the F-2415 capillary rotor for haematocrit testing at 12000 rpm and 14490 x g. The cabinet measures approximately 320 x 400 x 310 mm and weighs 17 kg without a rotor.