Brand: GEMMY Industrial | Category: Medical Equipment
An eight place table top centrifuge fitted with the A-0815 rotor for 15 ml or 10 ml test tubes, running to a maximum of 4500 rpm. Control is by mechanical 60 minute timer with an LED lamp as the power indicator. The cabinet measures 270 x 270 x 250 mm, the same footprint as the rest of the PLC bench range. GEMMY lists CE, ISO, GMP and FDA against the model.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
The digital member of the PLC-012 pair, specified with an LED digital tachometer, a 99 minute digital timer and microprocessor speed control, where the base PLC-012 uses an analogue tachometer and a mechanical timer. GEMMY quotes 0 to 12000 rpm across the PLC-012 series depending on which rotor is fitted, driven by an 80 W brush motor inside a moulded stainless steel chamber. Rotors are changed quickly using the attached hexagon wrench, and a safety locking latch with an interlock switch cuts the motor if the lid is opened mid spin. The cabinet measures 310 x 360 x 310 mm and the drive brakes to a gentle stop in 20 seconds.
A six place table top centrifuge holding tubes of 10 or 15 ml on a fixed angle rotor, with a speed range of 1000 to 4000 rpm and a 4500 rpm variant available. Setting is by mechanical 60 minute timer, and an LED lamp indicates that power is applied. GEMMY offers a fixed speed build on request and an automatic shutout safety device as an option, and the cast iron base with three rubber suction feet keeps the unit stable through a run. The listing quotes ISO 9001, ISO 13485, CE, GMP and FDA against the model.
A brushless universal centrifuge adjustable from 1000 to 12000 rpm on a three digit LED readout, with microprocessor speed control and a two digit 99 minute timer. Universal multi-voltage operation from 100 V to 240 V removes the need for a transformer, and the stainless steel chamber carries automatic imbalance detection, an overheating sensor on motor and driver, an interlocking lid with manual override for power failures and an emergency stop. Five rotors are published for the machine, from an eight place 15 ml angle rotor to the F-2415 capillary rotor for haematocrit work at a fixed 12000 rpm and 14490 x g. A transparent viewfinder in the lid allows the rotor to be watched while it spins.