Brand: Retsch | Category: Scientific & Laboratory Equipment
Hammer mill for crushing and pulverising large sample volumes of medium hard, hard, brittle, tough and fibrous material at up to 1500 kg per hour. Feed material is reduced by impact from swinging hammers and passes a bottom sieve at below 0.8 mm. Its size and throughput place it between laboratory and pilot plant duty.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Retsch equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
Back to Scientific & Laboratory Equipment
Benchtop cutting mill for small quantities of soft, medium hard, tough, elastic and fibrous material such as plastics, textiles and plant matter. The grinding chamber design allows a high proportion of the sample to be recovered, which matters when only a small amount of material is available.
Cross beater mill for coarse and fine size reduction of medium hard and brittle material such as coal, coke, minerals and slag. It runs from laboratory to pilot plant scale and the adjustable rotor speed with an exchangeable bottom sieve sets the final fineness down to below 100 µm.
Basic model cutting mill for routine size reduction of soft, medium hard, elastic and fibrous material. A fixed 1,500 rpm rotor cuts the sample against stationary knives until it passes the bottom sieve, which sets the final fineness between 0.25 mm and 20 mm.