Brand: GEMMY Industrial | Category: Medical Equipment
A vortex mixer measuring 145 x 170 x 185 mm with a 4.2 mm eccentric, reaching 3200 rpm on a single tube and 1500 rpm with the 3 inch pad fitted. Like the rest of the VM range it offers both touch and switch modes, touch for short intermittent bursts and switch for continuous running. GEMMY lists CE, ISO and GMP against the model.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
A seven roller mixer that rocks and rolls simultaneously at a fixed 40 rpm, plus or minus 3 rpm, for blood samples, reagents and viscous substances that need a gentle action rather than a vortex. A 19 mm diameter eccentric produces three dimensional rocking at both sides, motioned by built-in POM gears and a 24 V 5.17 W gear motor. Rollers are 32 mm in diameter and 320 mm long, alkali and acid resistant, taking 18 tubes of 5 ml, 12 of 10 ml, 12 of 15 ml or 12 of 50 ml up to a 5 kg load. A mechanical 180 minute timer allows continuous or intermittent operation, and GEMMY specifies operation from 4 to 60 degrees C, 40 to 90 per cent humidity, up to 4000 metres altitude and 700 to 1060 hPa.
A benchtop vortex mixer running to 3150 rpm with a single tube head, or 1800 rpm with the 3 inch pad, driven by a 5.6 mm eccentric. Two mixing heads are interchangeable: a 26 mm diameter rubber cup for conventional single tube work, and a 3 inch platform pad for multiple tubes or a flask. Operation is either TOUCH for intermittent running, where stirring intensity is controlled by the pressure applied to the pad, or SWITCH for continuous mixing at the flip of a switch. The unit measures 130 x 165 x 180 mm and weighs 5.0 kg, heavy enough to resist slipping and creeping under vibration.
An orbital shaker with a 263 x 263 mm platform and a 21 mm orbit, set between 75 and 250 rpm or supplied to run at a fixed 130 rpm. It is intended for long term uniform mixing of test solutions in micro-titration assays and for haematology, urology and EIA or ELISA immunology work, including Alpha, Kline, Mazzini, syphilis and pregnancy applications. A textured non-slip rubber foam pad grips printed well slides, culture plates, flasks and tube racks by friction, and the contoured platform holds six plates. The single eccentric drive carries 1 kg at 100 rpm, and a lit ON/OFF switch shows at a glance whether the unit is running, either continuously or on a timer up to 60 minutes.