Brand: GEMMY Industrial | Category: Medical Equipment
An orbital shaker with a 263 x 263 mm platform and a 21 mm orbit, set between 75 and 250 rpm or supplied to run at a fixed 130 rpm. It is intended for long term uniform mixing of test solutions in micro-titration assays and for haematology, urology and EIA or ELISA immunology work, including Alpha, Kline, Mazzini, syphilis and pregnancy applications. A textured non-slip rubber foam pad grips printed well slides, culture plates, flasks and tube racks by friction, and the contoured platform holds six plates. The single eccentric drive carries 1 kg at 100 rpm, and a lit ON/OFF switch shows at a glance whether the unit is running, either continuously or on a timer up to 60 minutes.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
The compact orbital shaker in GEMMY's range, 215 x 200 x 130 mm and 2.2 kg, with a 215 x 175 mm platform and a 21 mm orbit. Speed is set from 75 to 250 rpm, or the unit can be supplied at a fixed 130 rpm, on a single eccentric drive rated for 1 kg at 100 rpm. The contoured platform takes three 96 well microplates, and the textured non-slip rubber foam pad also grips printed well slides, culture plates, flasks and tube racks. It runs continuously or on a timer for intermittent shaking up to 60 minutes, with a lit ON/OFF switch.
A seven roller mixer that rocks and rolls simultaneously at a fixed 40 rpm, plus or minus 3 rpm, for blood samples, reagents and viscous substances that need a gentle action rather than a vortex. A 19 mm diameter eccentric produces three dimensional rocking at both sides, motioned by built-in POM gears and a 24 V 5.17 W gear motor. Rollers are 32 mm in diameter and 320 mm long, alkali and acid resistant, taking 18 tubes of 5 ml, 12 of 10 ml, 12 of 15 ml or 12 of 50 ml up to a 5 kg load. A mechanical 180 minute timer allows continuous or intermittent operation, and GEMMY specifies operation from 4 to 60 degrees C, 40 to 90 per cent humidity, up to 4000 metres altitude and 700 to 1060 hPa.
The heavy duty shaker in the range, with a 422 x 282 mm platform, a triple eccentric drive and counterbalance that hold a vibration free 25.4 mm orbit at speed even under heavy or unbalanced loads. Solid state control covers 40 to 400 rpm and the platform carries 15 kg at 100 rpm, with speed shown on an analogue tachometer or a three digit LED so runs can be repeated accurately. The platform turns on six permanently lubricated sealed ball bearings, and the precision machined drive housing sits on four cushioned feet that stop the unit creeping. Flask platforms are listed as GE-125-15 for fifteen 125 ml flasks, GE-250-11 for eleven 250 ml flasks and GE-500-06 for six 500 ml flasks, and timed operation runs up to 180 minutes.