Brand: CH Instruments | Category: Nanotechnology
TE100 is the screen printed electrode with a built in three electrode configuration, carrying working, reference and counter electrodes plus an insulated layer and contacts on one strip. CH Instruments publish a 3 mm working diameter and a 0.071 cm2 working area for it and supply it in packs of 40 for aqueous solutions. It is the largest of the three built in three electrode sizes, ahead of the 2 mm TE101 and the 1.5 mm TE102.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about CH Instruments equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
Part 002417 is a glassy carbon electrode published with an outside diameter of 10 mm and an inside diameter of 5.0 mm. CH Instruments list it as a separate glassy carbon electrode alongside the 3 mm CHI104 working electrode.
SE101 is a screen printed carbon electrode in the single working electrode configuration, published with a 3 mm working diameter and a working area of 0.071 cm2 for aqueous solutions. CH Instruments list it in packs of 40 and describe the screen printed range as disposable or reusable, needing no electrode polishing, open to chemical modification, and extendable in applicability after preanodisation. It sits between the 5 mm SE100 and the 1.5 mm SE102 in the published single electrode series.
The MS30 high speed encoded stage (HSES) moves a sample under the Raman microscope with step sizes down to 50 nm, driven by proprietary direct drive DC motors with novel control algorithms that stay quiet and controlled even over large distances. Its travel range of 112 mm × 76 mm allows several samples to be studied in one session, and it returns to the same XY position to within ±0.35 µm, which matters when revisiting particles smaller than 1 µm such as microplastics, pharmaceutical ingredients, cement powders and electrode powders. Renishaw's patented EasyMove stage system suspends motorisation when the stage is pulled forward for loading and resumes it when released, with the encoders tracking position throughout. The stage is offered with the inVia confocal Raman microscope, the RA802 pharmaceutical analyser and the RA816 biological analyser, and options include a sampling accessory kit and an ANSI/SLAS microplate holder.