Brand: GEMMY Industrial | Category: Medical Equipment
A micro haematocrit centrifuge for packed cell volume work, used in biochemistry, microbial immunity genetics, blood separation and general clinical testing to establish the percentage of red blood cells against whole blood, which can indicate anaemia or polycythaemia. GEMMY states that all models in the range run at a fixed 12000 rpm apart from the PLC-012 and PLC-012E. The time is set and the run started with the START button, the rotor lid must be closed before spinning, and a reading scale is supplied so the capillary tube can be read directly. EPDM is used for the rotor gasket to extend service life, and a safety device cuts the power if the lid is opened during operation.
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about GEMMY Industrial equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
KHT-400 is listed by GEMMY within its micro haematocrit centrifuge range, alongside the KHT-410 and KHT-410E. The manufacturer publishes no product name, no specification, no key features and no approval details for this model; the page carries only the model number and a product photograph. Specification, capillary tube capacity and speed should be confirmed with GEMMY before the model is offered.
The small bath in GEMMY's constant temperature range, a 5 litre analogue unit with a thermometer readout and a stainless steel sheathed immersion heating element. It works from 5 degrees C above ambient up to 100 degrees C for biological, clinical research, medical, biochemical, industrial and teaching laboratories. The moulded tank has rounded corners and seamless stainless steel sides for even circulation and easy cleaning, and a rotating stirrer directs flow around the tank to improve uniformity. Concentric ring covers are offered to cut heat loss when flasks are suspended in the bath.
A binocular laboratory microscope with a measuring single tube inclined at 45 degrees and rotating through 360 degrees, with interpupillary distance adjustable from 48 mm to 75 mm. It is supplied with WF10X and WF16X eyepieces and a four position achromatic objective set of 4X, 10X, 40X and 100X. The double layer mechanical stage measures 140 x 130 mm with a 70 x 50 mm moving range, over an N.A. 1.25 Abbe condenser with iris diaphragm. Coaxial coarse and fine focusing runs on a rack and pinion mechanism with a fine focusing scale value of 0.002 mm, lit by a built-in 6V 20W variable brightness lamp. GEMMY publishes no product name for this model, only the model number PB-3320.