Brand: WissEl | Category: Nanotechnology
The high velocity version of the MVT-1000 velocity transducer, fitted with 1.5 mm multilayer guide springs. The stiffer springs keep the mechanical amplitude small, which is what allows source velocities above 1000 mm/s when driven by a high velocity drive unit.
| Parameter | Value |
|---|---|
| Specification | High velocity transducers are equipped with 1.5 mm multilayer guide springs |
| Specification | High velocity drive systems reach above 1000 mm/s |
Contact Vvon Technologies Limited about WissEl equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
The high velocity version of the MR-260A Mossbauer drive unit. It is built as a wider NIM module with four front panel potentiometers for the feedback loop and a rear panel fan that cools the power stage during high velocity operation.
The high velocity version of the MA-260S velocity transducer. It carries 1.5 mm multilayer guide springs in place of the standard 0.8 mm epoxy springs, which raises the resonance frequency and allows much higher source velocities with a high velocity drive unit.
The high velocity version of the MR-360 Mossbauer drive unit, the model that adds a maximum velocity display. WissEl publishes it only in the list of high velocity drive units, with the shared features common to that range and no separate specification table.