Brand: Carbolite Gero | Category: Nanotechnology
Custom furnaces for carbon fibre research and production, covering the three stages of the process. Precursors are debound in a metal work tube, pre-sintered in a ceramic work tube, then finally sintered in a water cooled graphite heated vessel.
| Parameter | Value |
|---|---|
| Specification | Debinding up to 800 deg C in a tube furnace with a metal work tube |
| Specification | Pre-sintering up to 1300 deg C in a tube furnace with a ceramic work tube |
| Specification | High temperature sintering up to 2200 deg C in a water cooled graphite heated vessel |
| Specification | Up to 4 fibres can be heat treated in one furnace at the same time |
| Specification | Inert gas counter flow flanges allow open operation during inert gas heat treatment |
Not sure which configuration you need? Help me choose
Contact Vvon Technologies Limited about Carbolite Gero equipment requirements in Bangladesh.
Phone: +880 1711-738207 | Email: info@vvon.com.bd
Earlier-model variable-pressure scanning electron microscope, retained for SU3500 reference and configuration enquiries. Confirm current instrument, spare-part and support availability before ordering. For a new microscope shortlist, compare the separately catalogued SU3800/SU3900 family against your sample and analysis requirements.
The TM4000II and TM4000PlusII are benchtop scanning electron microscopes for fast imaging with little sample preparation. They take specimens up to 80 mm across using backscattered electron detection, with secondary electron and mixed signal modes on the Plus model.
Continuous heat treatment furnaces through which one or more strands of material pass for hardening and tempering. The strand runs through Inconel or ceramic tubes, and individually controlled zones hold uniformity along long heated lengths.